[linux-dvb] Re: TwinhanDTV Ter-CI

[Manu Abraham <manu@kromtek.com>]

On Thu December 30 2004 12:45 pm, Berry Perzon wrote:
> > On Thu December 30 2004 12:40 am, Berry Perzon wrote:
> > > > On Wed December 29 2004 11:50 pm, Berry Perzon wrote:
> > > > > The DVB-T card is a brand new "TwinhanDTV Ter-CI". I'm using kernel
> > > > > 2.6.10-rc3-mm1. Any ideas?
> > > >
> > > > That card is a VP-3040 ?
> > > >
> > > > Manu
> > >
> > > That's correct, I just checked it. Why?
> >
> > I have added that card to the latest code, have not but committed it yet,
> > but will do soon. That card has some more registers, and return values
> > are also a bit different.
> >
> > The signal strength translation also is different for the card.
> >
> > You have the CA daughterboard ?
> >
> > Manu
>
> Yes, I have the CA daughterboard. I also have a "SCM CA-modul" and a Boxer
> (Swedish) card. If you need any extra testing of the latest code, please
> let me know. Maybe I can help you with that.
That would be nice, let me get some more things out.. The CA on that board is 
slightly different, different registers, so CA on that will take a little bit 
more time i believe, but it would be nice to know what happens through..

>
> I found another message, written by you Manu, in
> http://www.linuxtv.org/mailinglists/linux-dvb/2004/12-2004/msg00600.html.
>
I have done more work on that, just testing out some more.. I will send in new 
code soon..

> I just downloaded the dvb-kernel from 16-Dec-2004, and pathed it. I can't
> test it right now, because I'm at work, but I will give it a go when I get
> home tonight.
The FTA stuff should be okay i think .. Can you try that out first ?

Manu
>
> > > > > Dec 29 19:12:31 srv01 kernel: Linux video capture interface: v1.00
> > > > > Dec 29 19:12:31 srv01 kernel: bttv: driver version 0.9.15 loaded
> > > > > Dec 29 19:12:31 srv01 kernel: bttv: using 8 buffers with 2080k (520
> > > > > pages) each for capture
> > > > > Dec 29 19:12:31 srv01 kernel: bttv: Bt8xx card found (0).
> > > > > Dec 29 19:12:31 srv01 kernel: ACPI: PCI interrupt 0000:03:04.0[A]
> > > > > -> GSI 3 (level, low) -> IRQ 3
> > > > > Dec 29 19:12:31 srv01 kernel: bttv0: Bt878 (rev 17) at
> > > > > 0000:03:04.0, irq: 3, latency: 32, mmio: 0xf4081000
> > > > > Dec 29 19:12:31 srv01 kernel: bttv0: detected: Twinhan VisionPlus
> > > > > DVB-T [card=113], PCI subsystem ID is 1822:0001
> > > > > Dec 29 19:12:31 srv01 kernel: bttv0: using: Twinhan DST + clones
> > > > > [card=113,autodetected]
> > > > > Dec 29 19:12:31 srv01 kernel: bttv0: gpio: en=00000000,
> > > > > out=00000000 in=00f500fd [init] Dec 29 19:12:31 srv01 kernel:
> > > > > bttv0: using tuner=4 Dec 29 19:12:31 srv01 kernel: bttv0: add
> > > > > subdevice "dvb0"
> > > > > Dec 29 19:12:42 srv01 kernel: bt878: AUDIO driver version 0.0.0
> > > > > loaded Dec 29 19:12:42 srv01 kernel: bt878: Bt878 AUDIO function
> > > > > found (0). Dec 29 19:12:42 srv01 kernel: ACPI: PCI interrupt
> > > > > 0000:03:04.1[A] -> GSI 3 (level, low) -> IRQ 3
> > > > > Dec 29 19:12:42 srv01 kernel: bt878(0): Bt878 (rev 17) at 03:04.1,
> > > > > irq: 3, latency: 32, memory: 0xf4082000
> > > > > Dec 29 19:12:48 srv01 kernel: DVB: registering new adapter (bttv0).
> > > > > Dec 29 19:12:48 srv01 kernel: dst_check_ci: unable to recognize  or
> > > > > DTT-CI Dec 29 19:12:48 srv01 kernel: dst_check_ci please email
> > > > > linux-dvb@linuxtv.org with this type in
> > > > > Dec 29 19:12:48 srv01 kernel: DST type : satellite
> > > > > Dec 29 19:12:48 srv01 kernel: DST type flags : 0x4 symdiv
> > > > > Dec 29 19:12:48 srv01 kernel: DVB: registering frontend 0 (DST
> > > > > DVB-S)...
> > >
> > > ------- End of Original Message -------
>
> ------- End of Original Message -------