[linux-dvb] Re: TwinhanDTV Ter-CI

[Manu Abraham <manu@kromtek.com>]

On Thu December 30 2004 8:08 pm, Berry Perzon wrote:
> > On Thu December 30 2004 12:45 pm, Berry Perzon wrote:
> > > > On Thu December 30 2004 12:40 am, Berry Perzon wrote:
> > > > > > On Wed December 29 2004 11:50 pm, Berry Perzon wrote:
> > > > > > > The DVB-T card is a brand new "TwinhanDTV Ter-CI". I'm using
> > > > > > > kernel 2.6.10-rc3-mm1. Any ideas?
> > > > > >
> > > > > > That card is a VP-3040 ?
> > > > > >
> > > > > > Manu
> > > > >
> > > > > That's correct, I just checked it. Why?
> > > >
> > > > I have added that card to the latest code, have not but committed it
> > > > yet, but will do soon. That card has some more registers, and return
> > > > values are also a bit different.
> > > >
> > > > The signal strength translation also is different for the card.
> > > >
> > > > You have the CA daughterboard ?
> > > >
> > > > Manu
> > >
> > > Yes, I have the CA daughterboard. I also have a "SCM CA-modul" and a
> > > Boxer (Swedish) card. If you need any extra testing of the latest code,
> > > please let me know. Maybe I can help you with that.
> >
> > That would be nice, let me get some more things out.. The CA on that
> > board is slightly different, different registers, so CA on that will take
> > a little bit more time i believe, but it would be nice to know what
> > happens through..
> >
> > > I found another message, written by you Manu, in
> > > http://www.linuxtv.org/mailinglists/linux-dvb/2004/12-2004/msg00600.htm
> > >l.
> >
> > I have done more work on that, just testing out some more.. I will send
> > in new code soon..
> >
> > > I just downloaded the dvb-kernel from 16-Dec-2004, and pathed it. I
> > > can't test it right now, because I'm at work, but I will give it a go
> > > when I get home tonight.
> >
> > The FTA stuff should be okay i think .. Can you try that out first ?
> >
> > Manu
>
> Alright, I'm home and trying. This is what I get.
>
> Dec 30 17:01:48 srv01 kernel: Linux video capture interface: v1.00
> Dec 30 17:01:48 srv01 kernel: bttv: driver version 0.9.15 loaded
> Dec 30 17:01:48 srv01 kernel: bttv: using 8 buffers with 2080k (520 pages)
> each for capture Dec 30 17:01:48 srv01 kernel: bttv: Bt8xx card found (0).
> Dec 30 17:01:48 srv01 kernel: ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 3
> (level, low) -> IRQ 3 Dec 30 17:01:48 srv01 kernel: bttv0: Bt878 (rev 17)
> at 0000:03:04.0, irq: 3, latency: 32, mmio: 0xf4081000 Dec 30 17:01:48
> srv01 kernel: bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI
> subsystem ID is 1822:0001 Dec 30 17:01:48 srv01 kernel: bttv0: using:
> Twinhan DST + clones [card=113,autodetected] Dec 30 17:01:48 srv01 kernel:
> bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init] Dec 30 17:01:48
> srv01 kernel: bttv0: using tuner=4
> Dec 30 17:01:48 srv01 kernel: bttv0: add subdevice "dvb0"
> Dec 30 17:01:48 srv01 kernel: bt878: AUDIO driver version 0.0.0 loaded
> Dec 30 17:01:48 srv01 kernel: bt878: Bt878 AUDIO function found (0).
> Dec 30 17:01:48 srv01 kernel: ACPI: PCI interrupt 0000:03:04.1[A] -> GSI 3
> (level, low) -> IRQ 3 Dec 30 17:01:48 srv01 kernel: bt878(0): Bt878 (rev
> 17) at 03:04.1, irq: 3, latency: 32, memory: 0xf4082000 Dec 30 17:01:48
> srv01 kernel: DVB: registering new adapter (bttv0). Dec 30 17:01:49 srv01
> kernel: dst_check_ci: recognize DTT-CI
> Dec 30 17:01:49 srv01 kernel: DST type : terrestrial
> Dec 30 17:01:49 srv01 kernel: DST type flags : 0x2 ts204 0x10 firmware
> version = 2 Dec 30 17:01:49 srv01 kernel: DVB: registering frontend 0 (DST
> DVB-T)...
>
> Look's alright, except for the ts204. Shouldnt it be ts188 for a VP-3040
> with a CA daughterboard? How do I change it?
The VP-3040, there are 2 versions, TS-188 and TS-204, that only makes matters 
worser.. In my new code it is there, it is on a register on the MCU whether 
it is TS-188 or TS-204. It will be soon there, but only next year .. not this 
year..



Manu
>
> When I try to run dvbscan, I get a lot of "WARNING: >>> tuning failed!!!",
> and dvbscan exits with
>
> ERROR: initial tuning failed
> dumping lists (0 services)
> Done.
>
> > > > > > > Dec 29 19:12:31 srv01 kernel: Linux video capture interface:
> > > > > > > v1.00 Dec 29 19:12:31 srv01 kernel: bttv: driver version 0.9.15
> > > > > > > loaded Dec 29 19:12:31 srv01 kernel: bttv: using 8 buffers with
> > > > > > > 2080k (520 pages) each for capture
> > > > > > > Dec 29 19:12:31 srv01 kernel: bttv: Bt8xx card found (0).
> > > > > > > Dec 29 19:12:31 srv01 kernel: ACPI: PCI interrupt
> > > > > > > 0000:03:04.0[A] -> GSI 3 (level, low) -> IRQ 3
> > > > > > > Dec 29 19:12:31 srv01 kernel: bttv0: Bt878 (rev 17) at
> > > > > > > 0000:03:04.0, irq: 3, latency: 32, mmio: 0xf4081000
> > > > > > > Dec 29 19:12:31 srv01 kernel: bttv0: detected: Twinhan
> > > > > > > VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001
> > > > > > > Dec 29 19:12:31 srv01 kernel: bttv0: using: Twinhan DST +
> > > > > > > clones [card=113,autodetected]
> > > > > > > Dec 29 19:12:31 srv01 kernel: bttv0: gpio: en=00000000,
> > > > > > > out=00000000 in=00f500fd [init] Dec 29 19:12:31 srv01 kernel:
> > > > > > > bttv0: using tuner=4 Dec 29 19:12:31 srv01 kernel: bttv0: add
> > > > > > > subdevice "dvb0"
> > > > > > > Dec 29 19:12:42 srv01 kernel: bt878: AUDIO driver version 0.0.0
> > > > > > > loaded Dec 29 19:12:42 srv01 kernel: bt878: Bt878 AUDIO
> > > > > > > function found (0). Dec 29 19:12:42 srv01 kernel: ACPI: PCI
> > > > > > > interrupt 0000:03:04.1[A] -> GSI 3 (level, low) -> IRQ 3
> > > > > > > Dec 29 19:12:42 srv01 kernel: bt878(0): Bt878 (rev 17) at
> > > > > > > 03:04.1, irq: 3, latency: 32, memory: 0xf4082000
> > > > > > > Dec 29 19:12:48 srv01 kernel: DVB: registering new adapter
> > > > > > > (bttv0). Dec 29 19:12:48 srv01 kernel: dst_check_ci: unable to
> > > > > > > recognize  or DTT-CI Dec 29 19:12:48 srv01 kernel: dst_check_ci
> > > > > > > please email linux-dvb@linuxtv.org with this type in
> > > > > > > Dec 29 19:12:48 srv01 kernel: DST type : satellite
> > > > > > > Dec 29 19:12:48 srv01 kernel: DST type flags : 0x4 symdiv
> > > > > > > Dec 29 19:12:48 srv01 kernel: DVB: registering frontend 0 (DST
> > > > > > > DVB-S)...
> > > > >
> > > > > ------- End of Original Message -------
> > >
> > > ------- End of Original Message -------
>
> ------- End of Original Message -------