[vdr] Help VDR works but no output

["Jonathan Meads" <jonathan.meads@talbotuw.com>]

Hi

I have some problems with vdr, I have a Hauppauge DVB-s and a Hauppauge
Nova-t PCI card. I am using the latest DVB driver (not the CVS one) which
installed fine, VDR compiles and runs however I have a few problems.

I get no output - in the syslog I get the errors "illegal video device
handle (-1)!" and "channel # not sync'ed on DVB card 2!" "retrying".

I rebuilt VDR with the Debug_osd=1 and the menu works - cool!

If its any help - I have revision 2.1 of the DVB-s card. Running Slackware
version 8 on a 800 Duron, 256 MB RAM

The setup.conf file is as per the default, the channels.conf file I took of
Dave Chapmans web site and I removed the satellite channels leaving only the
DVB-t channels. (I'm in East London)

How do I know that the DVB-s card is the primary card ? is there a way to
check if its the primary card ?

Any ideas what I've done wrong ?


Thanks for your help

Regards
Jonathan

"WorldSecure <talbotuw.com>" made the following
 annotations on 12/21/01 10:07:13
------------------------------------------------------------------------------
Talbot Underwriting Ltd
Registered Office:
Gracechurch House
55 Gracechurch Street
London  EC3V 0JP
Registered Number: 2202362 England
Telephone: 020 7550 3500
Facsimile: 020 7550 3555
For more information about Talbot Underwriting please visit our website at www.talbotuw.com

Confidentiality Notice :  This message is confidential to the sender and the persons to whom it is addressed and may be protected by legal privilege. Reproduction or publication of the message or its contents without consent is prohibited. If you receive the message in error, please destroy the same and if you could in such case inform the sender of the misdirection, it would be appreciated.


[INFO] -- Virus Manager:
Virus swept by Talbot Underwriting Ltd 
==============================
No Viruses were detected in this message.

==============================================================================

> ************