Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: How do you poweron your VDR Box via IR?
On 02 Feb 2002 13:38:00 +0200, Usenet-372114@zocki.toppoint.de (Rainer
Zocholl) wrote:
> Don't switch the PC, switch a small plug-In 12V powersupply
> (Preferable a good one, with enough iron (see ELV "Oeko")
> or a switching one, don't use those 2EUR Taiwan crap!)
> Wire the 12V to "Ring" in the right way and
> set BIOS to "Wake on Ring" too.
Good idea!
If I use one of the switched outputs of my A/V-receiver this should work
immediately. In my setup the A/V-receiver must be turned on anyway.
Emil
Home |
Main Index |
Thread Index