[vdr] Re: AW: Re: AW: Re: Sound problems with recordings from Pro.7

["Rienecker, Fa. Evenio, ITS P, M" <C.Rienecker@deutschepost.de>]

voltage devider is correct ;-)

You mhave a look at http://bashy.bei.t-online.de/scart.html
Esp. 'Vorschlag für Digitalausgang Ton'

The picture shows both, electrical and optical SPDIF connection.
IOW. your right: 2 resistors are enough, the capacitors are said to be of minor importance (according to this mailinglist).

CU,
Christian.

> -----Original Message-----
> From: Oliver Friedrich [mailto:oliver@familie-friedrich.de]
> Sent: Thursday, September 19, 2002 1:24 PM
> To: vdr@linuxtv.org
> Subject: [vdr] AW: Re: AW: Re: Sound problems with recordings 
> from Pro.7
> 
> 
> Hi
> Ok, than i will not connect Pin4 directly to my Kenwood receiver...
> 
> Is there a better solution than a small voltage divider 
> (don't know, if this
> is the right translation, but i mean the german 
> "Spannungsteiler" with two
> resistors).
> 
> 
> Oliver
> 
> -----Ursprüngliche Nachricht-----
> Von: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org]Im Auftrag
> von Rene Bartsch
> Gesendet: Donnerstag, 19. September 2002 13:11
> An: vdr@linuxtv.org
> Betreff: [vdr] Re: AW: Re: Sound problems with recordings from Pro.7
> 
> 
> 
> ----- Original Message -----
> From: "Oliver Friedrich" <oliver@familie-friedrich.de>
> To: <vdr@linuxtv.org>
> Sent: Thursday, September 19, 2002 8:34 AM
> Subject: [vdr] AW: Re: Sound problems with recordings from Pro.7
> 
> 
> > Hi,
> > where can i see, if the recording is in AC3?
> >
> > Up to now i have not connected the DVB-s via digital out to 
> my receiver,
> but
> > this will come in the near future. Small question to this: 
> Can i directly
> > connect the Pin 4 of JP2 to the Digital-In of my receiver 
> or need i some
> > electronic between them?
> 
> It's critical. SPDIF is specified vor a voltage of 0.5 Volt, 
> but pin4 uses
> 3V.
> This may damage your amplifier.
> 
> Rene
> 
> >
> > I have demuxed audio and video on my windows machine and 
> then the sound is
> > ok (via media player). But i can't see, if the .vdr-file 
> contains an AC3
> > stream, too ...
> >
> > cu,
> > Oliver
> >
> > -----Ursprüngliche Nachricht-----
> > Von: vdr-bounce@linuxtv.org 
> [mailto:vdr-bounce@linuxtv.org]Im Auftrag
> > von Andreas Mair
> > Gesendet: Donnerstag, 19. September 2002 08:20
> > An: vdr@linuxtv.org
> > Betreff: [vdr] Re: Sound problems with recordings from Pro.7
> >
> >
> > Hi,
> >
> > On Wednesday 18 September 2002 22:48, Oliver Friedrich wrote:
> > > Hi list,
> > > i have recorded "Buffy the vampire slayer" from Pro.7 
> tonight. But now i
> > > want to replay the recording and have only garbage on the 
> audio output
> of
> > > my Siemens DVB-s 1.3
> > >
> > > What has happened? this is not the first recording, that has this
> problem.
> > > But it is allways on Pro.7
> >
> > Just a thought: do you record AC3 but don't have a receiver 
> on digital
> out?
> > Well, at least here that's the case. If I have a AC3 
> playback and switch
> my
> > receiver to use analog input I hear garbage.
> >
> > Regards,
> > Andreas
> >
> >
> >
> > > My system:
> > > P200MMX
> > > kernel 2.4.18 [mandrake 8.2 distribution]
> > > vdr 1.0.3 with AIO [don't know version]
> > > Siemens DVB-s 1.3
> > >
> > >
> > > Thanks in advance,
> > > Oliver
> >
> >
> >
> >
> >
> 
> 
> 
> 
>