[vdr] Re: remote control of second hauppauge 2.1

[Matthias Biel <Matthias.Biel@web.de>]

Oliver Endriss wrote:

>Matthias Biel wrote:
>  
>
>>I'm using vdr 1.1.15 and the driver 2002-11-01 with two hauppauge 2.1
>>cards. Is it possible to enable the remote control of the second card?
>>    
>>
>
>According to the source code, the driver supports the remote control 
>port of one card only.
>
>  
>
>>Previously I was using vdr 1.0.4 with the old driver. In this
>>configuration both remotes could be used in parallel. This was a
>>helpful feature because it was possible to switch from one tv set to
>>an other via selecting the primary DVB device in VDRs configuration.
>>    
>>
>
>Did you place the remote control receivers in two different rooms? 
>
yes, I build an extension cord to do this.

>The active remote control port should not change when you switch the 
>primary device in vdr. (I don't have the hardware to check this.)
>  
>
the old driver doesn't distinguish between both remotes, so it is also 
possible to use the remote control of the device that is not the primary.


Matthias



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.