[vdr] Re: diseqc.conf 4 lnb

[Andreas Henden <andreas.henden@vice-chairman.net>]

On Fri, 2003-03-14 at 15:40, Hermann Gausterer wrote:
> On Fri, Mar 14, 2003 at 02:44:28PM +0100, Andreas Henden wrote:
> > > he does have a dish with 4 single lnb´s (4 satelite positions) 
> > > and a diseq switch
> > That's correct.
> 
> i read that as:
> 4 * single port lnb with integrated "dumb" switch
> and hope that is correct ;-)
> 
> now go and try this :-)
> 
> S1.0W  11700 V  9750  t v W15 [E0 10 38 F0] W15 A W15 t
> S1.0W  99999 V 10600  t v W15 [E0 10 38 F0] W15 A W15 T
> S1.0W  11700 H  9750  t V W15 [E0 10 38 F0] W15 A W15 t
> S1.0W  99999 H 10600  t V W15 [E0 10 38 F0] W15 A W15 T
> 
> S5.0E  11700 V  9750  t v W15 [E0 10 38 F1] W15 A W15 t
> S5.0E  99999 V 10600  t v W15 [E0 10 38 F1] W15 A W15 T
> S5.0E  11700 H  9750  t V W15 [E0 10 38 F1] W15 A W15 t
> S5.0E  99999 H 10600  t V W15 [E0 10 38 F1] W15 A W15 T
> 
> S13.0E  11700 V  9750  t v W15 [E0 10 38 F2] W15 A W15 t
> S13.0E  99999 V 10600  t v W15 [E0 10 38 F2] W15 A W15 T
> S13.0E  11700 H  9750  t V W15 [E0 10 38 F2] W15 A W15 t
> S13.0E  99999 H 10600  t V W15 [E0 10 38 F2] W15 A W15 T
> 
> S19.2E  11700 V  9750  t v W15 [E0 10 38 F3] W15 A W15 t
> S19.2E  99999 V 10600  t v W15 [E0 10 38 F3] W15 A W15 T
> S19.2E  11700 H  9750  t V W15 [E0 10 38 F3] W15 A W15 t
> S19.2E  99999 H 10600  t V W15 [E0 10 38 F3] W15 A W15 T
> 
> should work "out of the box" (TM) ;-)
> 
> you have:   input1    1.0W
>             input2    5.0E
>             input3   13.0E
>             input4   19.2E
> 
> mfg hermann


It doesn't work very well. We have tried every solution on the list. At
the best we got 5.0E, 13.0E and 19.2E working. on input 2,3,4. So it
looks like input 1 is damaged. We then changed the wires so 13.0E is on
input 1 and 1.0W on input 3.

Our current setup is like this:
S13.0E  11700 V  9750  t v W15 [E0 10 38 F0] W15 t
S13.0E  99999 V 10600  t v W15 [E0 10 38 F1] W15 T
S13.0E  11700 H  9750  t V W15 [E0 10 38 F2] W15 t
S13.0E  99999 H 10600  t V W15 [E0 10 38 F3] W15 T
                                                                                                    
S5.0E  11700 V  9750  t v W15 [E0 10 38 F4] W15 t
S5.0E  99999 V 10600  t v W15 [E0 10 38 F5] W15 T
S5.0E  11700 H  9750  t V W15 [E0 10 38 F6] W15 t
S5.0E  99999 H 10600  t V W15 [E0 10 38 F7] W15 T
                                                                                                    
S1.0W  11700 V  9750  t v W15 [E0 10 38 F8] W15 t
S1.0W  99999 V 10600  t v W15 [E0 10 38 F9] W15 T
S1.0W  11700 H  9750  t V W15 [E0 10 38 FA] W15 t
S1.0W  99999 H 10600  t V W15 [E0 10 38 FB] W15 T
                                                                                                    
S19.2E  11700 V  9750  t v W15 [E0 10 38 FC] W15 t
S19.2E  99999 V 10600  t v W15 [E0 10 38 FD] W15 T
S19.2E  11700 H  9750  t V W15 [E0 10 38 FE] W15 t
S19.2E  99999 H 10600  t V W15 [E0 10 38 FF] W15 T


But there is some strange things going on. if we tune in on 5.0e you
have to tune in on a Horizontal channel first then you can watch
vertical channels. 19.2E has stopped working but 1.0w works on input3

From
-- 
Andreas Henden <andreas.henden@vice-chairman.net>



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.