[vdr] Re: Bug with 2 DVBs?

[gerhard.achs@gmx.at]

> Am Don, 2003-05-22 um 17.36 schrieb gerhard.achs@gmx.at:
> > It's not a bug, its a feature ;-)
> > If you want to control both cards seperately, use the -d (not quite sure
> vi
> > README MANUAL will give you confirmation) switch  ...
> > 
> 
> you mean the "-D" switch, but by default all devices are used ...
> 
> Its not a matter of the control, its ok for me to have all DVBs
> controlled by the same vdr processes, but it would be nice to have the
> OSD on all DVBs due I dont have a TV connected on each DVB ;)
so what for do you need the OSD then on each card?
> 
> 
> Regardless this one, why is there no signal on the second card after a
> new installation? 
Because these cards are not in use for this moment. If you start a recording
for example the 2. card will tune and start the recording ...
> 
> I tested this with xawtv -c /dev/video[01]
> 
> Output on the first card was ok, but no output on the second card
> 
> 
> > br,
> > axl
> > 
> > 
> > > Hello,
> > > 
> > > I have 2 PCs each equipped with 2 DVB-Cs (Hauppauge/Siemens and
> > > Siemens/Siemens)
> > > 
> > > Doing a new installation (vanilla with tvtv-plugin) the primary DVB
> > > works fine, but while changing to the secondary DVB there is no output
> > > on this card.
> > > 
> > > After a reboot everything works (please note: I have to switch at
> least
> > > once to the secondary card to make it work), so I guess it is a
> failure
> > > during the first initialisation ...
> > > 
> > > This happened with both PCs and vdr-1.1.31 (no tested with older
> > > versions). Driver was 04-27 / 05-10 / 05-20
> > > 
> > > BTW: IMHO it would be a good idea to have the OSD on all installed
> cards
> > > (so I could switch to the other cards and back without in/out plugging
> > > the video adapter)  
> 
> 
> 
> -- 
> Info:
> To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr"
> as subject.
> 

-- 
+++ GMX - Mail, Messaging & more  http://www.gmx.net +++
Bitte lächeln! Fotogalerie online mit GMX ohne eigene Homepage!



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.