Mailing List archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[vdr] Re: 1.1.33 and black screen



Jan Ekholm wrote:
> 
> On Tue, 27 May 2003, [iso-8859-1] "Bläser, Lars" wrote:
> 
> >i had such problems for a week after i was installing a new nic and
> >changing from 1.0.4 to the actual developer version (1.0.4 was runnig
> >fine)
> >
> >after removing the new nic and changing the irq´s (2 dvb-s, one was
> >shared with the irq of the bios-disabled usb) to definatly single use
> >(btw i now use a old ISA graka, less heat and irq) i have no problems
> 
> Well, the older versions worked ok, and the NIC has always been there
> (integrated into the MB). I could try to see if the BIOS allows me to
> change the IRQ though. Yes, it is a RealTek...
> 
> >i´m not shure what the problem was, a possible irq storm of the new
> >realtek nic or the shared irq of one dvb-s, but now i don´t have this
> >problem anymore (~3 times a day before, recording still worked fine but
> >live was black and for replay the picture froze and audio looped
> >imidiatly, after a while the watchdog restarted vdr) maybe i will try to
> >insert the "new" nic at the weekend for testing
> 
> Hmm, playback always has worked fine, as far as I can remember, no
> problems at all. It's watching/recording that has caused problems, and
> mostly for later versions of VDR and the DVB drivers. It's a Hauppauge
> full DVB-c card.

Could you try to determine whether it is a VDR or a driver problem?
Usually VDR and driver are both used in up-to-date versions, so it
may be hard to tell which one causes such a problem.

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.



Home | Main Index | Thread Index