[vdr] Problems with Finnish DVB-T channel Nelonen D

[Seppo Ingalsuo <seppo.ingalsuo@iki.fi>]

Hi,

Do other people get video freezes on this channel? Every 3rd minute the
video stops and normally doesn't continue without switching to another
channel and then back to "Nelonen D". The errors are present on both
live video and recordings.

I use Linux 2.4.20, DVB 2003-06-08, vdr 1.2.1, dxr3 plugin 0.2.0, etc. I
tried to remove patches such as EPG preferred language and subtitles but
it didn't change the behavior. Vdradmin 0.90 "timeout" is 10 min.

I included the log file. The freezes happened ~ 11:43, 11:46, 11:49,
11:52 (continued live video after a couple of seconds), and 11:55.
Channel 4 is the only problematic one. 

Jun 22 11:41:36 napsu vdr[9501]: switching to channel 4
Jun 22 11:41:36 napsu vdr[9695]: transfer thread ended (pid=9695)
Jun 22 11:41:36 napsu vdr[9696]: receiver thread ended on device 1
(pid=9696)
Jun 22 11:41:36 napsu vdr[9501]: cTS2PES got 0 TS errors, 1 TS
continuity errors
Jun 22 11:41:36 napsu vdr[9501]: cTS2PES got 0 TS errors, 1 TS
continuity errors
Jun 22 11:41:36 napsu vdr[9501]: buffer stats: 76704 (7%) used
Jun 22 11:41:36 napsu vdr[9699]: transfer thread started (pid=9699)
Jun 22 11:41:36 napsu vdr[9700]: receiver thread started on device 1
(pid=9700)
Jun 22 11:42:34 napsu vdr[9501]: dxr3: no translation found for 'DXR3'
in language 8 (suomi) 

Jun 22 11:43:57 napsu vdr[9501]: switching to channel 5
Jun 22 11:43:57 napsu vdr[9699]: transfer thread ended (pid=9699)
Jun 22 11:43:57 napsu vdr[9700]: receiver thread ended on device 1
(pid=9700)
Jun 22 11:43:57 napsu vdr[9501]: cTS2PES got 0 TS errors, 3 TS
continuity errors
Jun 22 11:43:57 napsu vdr[9501]: cTS2PES got 0 TS errors, 3 TS
continuity errors
Jun 22 11:43:57 napsu vdr[9501]: buffer stats: 75388 (7%) used
Jun 22 11:43:58 napsu vdr[9711]: transfer thread started (pid=9711)
Jun 22 11:43:58 napsu vdr[9712]: receiver thread started on device 1
(pid=9712)

Jun 22 11:44:05 napsu vdr[9501]: switching to channel 4
Jun 22 11:44:05 napsu vdr[9711]: transfer thread ended (pid=9711)
Jun 22 11:44:05 napsu vdr[9712]: receiver thread ended on device 1
(pid=9712)
Jun 22 11:44:05 napsu vdr[9501]: cTS2PES got 0 TS errors, 3 TS
continuity errors
Jun 22 11:44:05 napsu vdr[9501]: buffer stats: 5640 (0%) used
Jun 22 11:44:05 napsu vdr[9713]: transfer thread started (pid=9713)
Jun 22 11:44:05 napsu vdr[9714]: receiver thread started on device 1
(pid=9714)
Jun 22 11:44:05 napsu vdr[9501]: ERROR: illegal OSD device handle
(-462130583)!

Jun 22 11:46:48 napsu vdr[9501]: switching to channel 3
Jun 22 11:46:48 napsu vdr[9713]: transfer thread ended (pid=9713)
Jun 22 11:46:48 napsu vdr[9714]: receiver thread ended on device 1
(pid=9714)
Jun 22 11:46:48 napsu vdr[9501]: cTS2PES got 0 TS errors, 39 TS
continuity errors
Jun 22 11:46:48 napsu vdr[9501]: cTS2PES got 0 TS errors, 3 TS
continuity errors
Jun 22 11:46:48 napsu vdr[9501]: buffer stats: 52452 (5%) used
Jun 22 11:46:48 napsu vdr[9726]: transfer thread started (pid=9726)
Jun 22 11:46:48 napsu vdr[9727]: receiver thread started on device 1
(pid=9727)

Jun 22 11:46:53 napsu vdr[9501]: switching to channel 4
Jun 22 11:46:53 napsu vdr[9726]: transfer thread ended (pid=9726)
Jun 22 11:46:53 napsu vdr[9727]: receiver thread ended on device 1
(pid=9727)
Jun 22 11:46:53 napsu vdr[9501]: buffer stats: 42864 (4%) used
Jun 22 11:46:54 napsu vdr[9728]: transfer thread started (pid=9728)
Jun 22 11:46:54 napsu vdr[9729]: receiver thread started on device 1
(pid=9729)
Jun 22 11:46:54 napsu vdr[9728]: ERROR: unknown picture type '7'

Jun 22 11:49:41 napsu vdr[9501]: switching to channel 3
Jun 22 11:49:41 napsu vdr[9728]: transfer thread ended (pid=9728)
Jun 22 11:49:42 napsu vdr[9729]: receiver thread ended on device 1
(pid=9729)
Jun 22 11:49:42 napsu vdr[9501]: cTS2PES got 0 TS errors, 74 TS
continuity errors
Jun 22 11:49:42 napsu vdr[9501]: cTS2PES got 0 TS errors, 7 TS
continuity errors
Jun 22 11:49:42 napsu vdr[9501]: buffer stats: 52300 (4%) used
Jun 22 11:49:42 napsu vdr[9742]: transfer thread started (pid=9742)
Jun 22 11:49:42 napsu vdr[9743]: receiver thread started on device 1
(pid=9743)

Jun 22 11:49:47 napsu vdr[9501]: switching to channel 4
Jun 22 11:49:47 napsu vdr[9742]: transfer thread ended (pid=9742)
Jun 22 11:49:48 napsu vdr[9743]: receiver thread ended on device 1
(pid=9743)
Jun 22 11:49:48 napsu vdr[9501]: buffer stats: 40420 (3%) used
Jun 22 11:49:48 napsu vdr[9744]: transfer thread started (pid=9744)
Jun 22 11:49:48 napsu vdr[9745]: receiver thread started on device 1
(pid=9745)
Jun 22 11:51:36 napsu vdr[9501]: connect from 192.168.1.4, port 32918 -
accepted
Jun 22 11:51:36 napsu vdr[9501]: timer 2 modified (active)
Jun 22 11:51:36 napsu vdr[9501]: timer 6 modified (active)
Jun 22 11:51:37 napsu vdr[9501]: closing SVDRP connection
Jun 22 11:56:18 napsu vdr[9501]: switching to channel 3

BR,
Seppo

-- 
Seppo Ingalsuo - seppo.ingalsuo@iki.fi



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.