Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: analogtv & Haupaugge PVR350 install question
Right now I cant compile analog plugin ...
I get the error message "*** No rule to make target `videodev25.h',
needed by `analogtv.o'. Stop"
I think this is due to the mp1 which I didnt install because of the
"PVR" card
Any ideas what to do?
Uwe
Am Mit, 2003-11-05 um 19.20 schrieb Uwe Ortner:
> Hello,
>
> thanks for the information about PVRx50 & analogtv. I'm installing the
> beast now and have some questions :)
>
> Do I have do make the device node again with "mknod /dev/video2 c 81 0"
> (it is the 3rd card, 2xDVB-C on /dev/video0 & /dev/video1) ?
>
> modules.conf:
> alias char-major-81-0 off
> alias char-major-81-1 off
> #alias char-major-81-2 off
> alias char-major-81-2 ivtv
> options ivtv #debug=1
> options tuner type=2
> options msp3400 once=1 simple=1
> add below ivtv msp3400 saa7115 tuner
>
>
> Is "options tuner type=2" correct for germany?
>
>
> /var/adm/messages:
> --------------------------------------------
> Nov 5 20:06:53 irmi kernel: ivtv: You've not seen the last of willy!
> Nov 5 20:07:42 irmi kernel: ivtv: SGarray_size = 340, DSGarray_size =
> 16
> Nov 5 20:07:42 irmi kernel: ivtv: Found an iTVC15 based chip
> Nov 5 20:07:42 irmi kernel: i2c-algo-bit.o: Adapter: ivtv i2c driver #0
> scl: 1 sda: 1 -- testing...
> Nov 5 20:07:42 irmi kernel: i2c-algo-bit.o:1 scl: 1 sda: 0
> Nov 5 20:07:42 irmi kernel: i2c-algo-bit.o:2 scl: 1 sda: 1
> Nov 5 20:07:42 irmi kernel: i2c-algo-bit.o:3 scl: 0 sda: 1
> Nov 5 20:07:42 irmi kernel: i2c-algo-bit.o:4 scl: 1 sda: 1
> Nov 5 20:07:42 irmi kernel: i2c-algo-bit.o: ivtv i2c driver #0 passed
> test.
> Nov 5 20:07:42 irmi kernel: tuner: probing ivtv i2c driver #0 i2c
> adapter [id=0x10005]
> Nov 5 20:07:42 irmi kernel: tuner: chip found @ 0xc2
> Nov 5 20:07:42 irmi kernel: tuner(bttv): type forced to 2 (Philips NTSC
> (FI1236,FM1236 and compatibles)) [insmod]
> Nov 5 20:07:42 irmi kernel: saa7114.c: starting probe for adapter ivtv
> i2c driver #0 (0x10005)
> Nov 5 20:07:42 irmi kernel: saa7114.c: detecting saa7114 client on
> address 0x42
> Nov 5 20:07:42 irmi kernel: saa7115.c: writing init values
> Nov 5 20:07:44 irmi kernel: status: (1E) 0x48, (1F) 0xc0
> Nov 5 20:07:44 irmi kernel: msp34xx: init: chip=MSP3418W-A2, has NICAM
> support
> Nov 5 20:07:44 irmi kernel: msp3410: daemon started
> Nov 5 20:07:47 irmi kernel: ivtv: Encoder revision: 0x02040011
> Nov 5 20:07:47 irmi kernel: ivtv: Decoder revision: 0x02020023
> Nov 5 20:07:47 irmi kernel: ivtv: Device or minor 0 not accepted
> Nov 5 20:07:47 irmi kernel: ivtv: Device or minor 1 not accepted
> Nov 5 20:07:47 irmi kernel: ivtv: Registered v4l2 device, minor 2
> Nov 5 20:07:47 irmi kernel: ivtv: Registered v4l2 device, minor 32
> Nov 5 20:07:47 irmi kernel: ivtv: Registered v4l2 device, minor 224
> Nov 5 20:07:47 irmi kernel: ivtv: Registered v4l2 device, minor 16
> ----------------------------------
>
>
> Does "Device or minor x not accepted" harm my installation?
>
> Thanks
> Uwe
>
>
--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.
Home |
Main Index |
Thread Index