[vdr] Re: Problem with MPlayer

[Patrick Maier <maierp@informatik.tu-muenchen.de>]

On Thu, 25 Dec 2003, Juri Haberland wrote:
> Patrick Maier wrote:
> > Since I had not used the mplayer plugin for a real long time, I now
> > started
> > to use it again, but I had no success...
> > I tried to configure the mplayer.sh version 0.8.4 and installed the
> > MPlayer
> > 1.0pre3
> > but all I get when I start to play a file is a short interruption of the
> > sound and an "Device or resource busy" error from the MPlayer.
> > I've 2 cards, linux-dvb.2003-11-08, vdr-1.2.6.
>
> > Could it be that this is a problem that i have 2 cards and it tries to
> > play
> > on the wrong card?
>
> Yes, I think this is most likely your problem.
> What kind of cards do you have (nova/nexus...) and which card is your
> primary card?

I've 2 haupauge DVB-S cards:

============ begin of syslog ======================
Dec 25 14:47:19 dagobert kernel: Linux video capture interface: v1.00
Dec 25 14:47:20 dagobert kernel: DVB: registering new adapter
(Technotrend/Hauppauge PCI rev2.1 or 2.2).
Dec 25 14:47:20 dagobert kernel: PCI: Found IRQ 10 for device 00:09.0
Dec 25 14:47:20 dagobert kernel: PCI: Sharing IRQ 10 with 00:0e.0
Dec 25 14:47:20 dagobert kernel: PCI: Sharing IRQ 10 with 00:10.1
Dec 25 14:47:21 dagobert kernel: stv0299.c: setup for tuner BSRU6,
TDQB-S00x
Dec 25 14:47:21 dagobert kernel: DVB: registering frontend 0:0
(STV0299/TSA5059/SL1935 based)...
Dec 25 14:47:22 dagobert kernel: mt312_read: ret == -121
Dec 25 14:47:22 dagobert kernel: DVB: registering new adapter
(Siemens/Technotrend/Hauppauge PCI rev1.3).
Dec 25 14:47:22 dagobert kernel: PCI: Found IRQ 12 for device 00:0a.0
Dec 25 14:47:22 dagobert kernel: PCI: Sharing IRQ 12 with 00:10.2
Dec 25 14:47:23 dagobert kernel: DVB: registering frontend 1:0 (Grundig
29504-491, (TDA8083 based))...
Dec 25 14:47:23 dagobert kernel: mt312_read: ret == -121
Dec 25 14:47:25 dagobert kernel: DVB: AV7111(0) - firm f0240009, rtsl
b0250018, vid 71010068, app 8000261b
Dec 25 14:47:25 dagobert kernel: DVB: AV7111(0) - firmware supports CI
link layer interface
Dec 25 14:47:26 dagobert kernel: av7110(0): adac type set to 0
Dec 25 14:47:26 dagobert kernel: Technotrend/Hauppauge PCI rev2.1 or 2.2
adapter 0 has MAC addr = 00:d0:5c:20:45:97
Dec 25 14:47:28 dagobert kernel: DVB: AV7111(1) - firm f0240009, rtsl
b0250018, vid 71010068, app 8000261b
Dec 25 14:47:28 dagobert kernel: DVB: AV7111(1) - firmware supports CI
link layer interface
Dec 25 14:47:28 dagobert kernel: av7110(1): Crystal audio DAC detected
Dec 25 14:47:28 dagobert kernel: Siemens/Technotrend/Hauppauge PCI rev1.3
adapter 1 has MAC addr = 00:d0:5c:02:e5:e4
============== end of syslog ===========================

The second (rev1.3) is the one from which i get my picture and sound.

Is there an Option to set to get it work?

Greetz
Patrick


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.