[vdr] Re: vdr + kernel 2.6 another problem

[Alexander Wetzel <alexander.wetzel@web.de>]

Hello,

I've run some tests with 2.6, also.
If you get the OSD all problems should be solved...

I guess you haven't enabled DiSEqC (check Settings->LNB )or the file 
diseqc.conf is broken.

Your first channel conf looks broken to me, the last 3 digits should be zero. 
But the second looks good and is basicly what I have:

ARD:11836:h:S19.2E:27500:101:102:104:0:28106:0:0:0
ZDF:11953:h:S19.2E:27500:110:120:130:0:28006:0:0:0

With DiSEqC disabled I have exact the same behaviour as you, regardless of the 
kernel and vdr version.



On Sunday 28 December 2003 22:23, Dipl. Ing. Werner Punz wrote:
> First of all, I hope you all had a nice Christmas,
>
> but now to my problem. I got VDR thanks to the help from this
> list running under kernel 2.6 using a plain hauppauge DVB-S 1.3
> the problem I now face is that VDR runs, I can play back older recordings
> done with an older VDR version and I get the menu over xawtv,
> but somehow I cannot switch to the correct channels. The sat link
> is ok and passthrough into my sat receiver works after the drivers are
> loaded
> and I get the channels shown, but as soon as I choose one, nothing
> basically happens
> no sound output and xawtv does not show me any video (although I
> get the VDR overlay)
>
> I assume something might have changed in the channel format of newer VDR
> versions,
> I tried different channels.conf and the logs donīt really show an error:
>
> Here are various channel list examples I have used so far to get the
> thing up and running again:
>
> Das Erste:11837:h:0:27500:101:102:0:0:28106
> ZDF:11954:h:0:27500:110:120:0:0:28006
> 3sat:11954:h:0:27500:210:220:0:0:28007
>
> one from another file:
>
> ARD:11837:H:S19.2E:27500:101:102:104:0:28106:0:0:0
> ZDF:11954:H:S19.2E:27500:110:120:130:0:28006:0:0:0
> RTL:12188:H:S19.2E:27500:163:104:105:0:12003:0:0:0
> SAT 1:12480:V:S19.2E:27500:1791:1792:34:0:46:0:0:0
>
> I have to say that I am on DiSequ Position 0 with this one
> and basically the frequencies and LNBs are correctly switched
> because of the signal I get in the passthrough.



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.