[vdr] mplayer and divx

[<anders@sandell.net>]

Hi all,

I am trying to play a divx file with the mplayer plugin but keep getting
the error message below. As far as I can see it seems that I am missing a
codec..

Other files plays just fine.

Anyone with an idea on how to solve this?

Regards,
Anders


resume: resume file is '/media/sid/film/.mplayer.resume'
resume: successfully opened resume file
resume: searching resume  position for 'Pippi Lngstrump - Resan Till
Nordpolen.avi'
resume: no resume position found
MPlayer 1.0pre5-3.3.3 (C) 2000-2004 MPlayer Team

mplayer: mpNewVol=100.00 mpVolume=100.00 mpMute=0
CPU: Intel Pentium 4/Xeon/Celeron Foster 2259 MHz (Family: 8, Stepping: 4)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2

Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or
directory
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: Can't open
'/root/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: Can't open
'/usr/local/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf.
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using Linux hardware RTC timing (1024Hz).
Can't open input config file /root/.mplayer/input.conf: No such file or
directory
Can't open input config file /usr/local/etc/mplayer/input.conf: No such
file or directory
Falling back on default (hardcoded) input config

Playing /media/sid/film/Pippi Lngstrump - Resan Till Nordpolen.avi.
AVI file format detected.
VIDEO:  [DIVX]  704x384  16bpp  25.000 fps  1315.1 kbps (160.5 kbyte/s)
Clip info:
 Software: Nandub v1.0rc2
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 12000->192000 (96.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Opening /dev/dvb/adapter0/video0+audio0
==========================================================================
Forced video codec: ffdivx
Cannot find codec matching selected -vo and video format 0x58564944.
Read DOCS/HTML/en/codecs.html!
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Video: no video
PLAYBACK STARTED
mplayer: slave cmd: get_time_length
mplayer: slave cmd: get_percent_pos


MPlayer interrupted by signal 11 in module: key_events
- MPlayer crashed by bad usage of CPU/FPU/RAM.
  Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
  disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
  It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
  gcc version. If you think it's MPlayer's fault, please read
  DOCS/HTML/en/bugreports.html and follow the instructions there. We can't
and
  won't help unless you provide this information when reporting a possible
bug.
mplayer: slave cmd: quit
mplayer: waiting for child exit