[vdr] Re: device 1 has no lock, can't attach receiver? cx88

[rupert <h.engemann@az-lantech.de>]

I use a Nova-t with connexant chipset and vdr. 1.3.17.

I also missed to attach this:

ipv6                  269568  12
cx88_dvb                7940  0
mt352                   6916  1 cx88_dvb
video_buf_dvb           7684  1 cx88_dvb
dvb_core               86184  1 video_buf_dvb
cx22702                11140  1 cx88_dvb
cx88_blackbird         16900  0
cx8802                 11780  2 cx88_dvb,cx88_blackbird
firmware_class         11392  1 cx88_blackbird
cx8800                 33036  0
cx88xx                 56220  4 cx88_dvb,cx88_blackbird,cx8802,cx8800
video_buf              23300  6
cx88_dvb,video_buf_dvb,cx88_blackbird,cx8802,cx8800,cx88xx
dvb_pll                 4996  3 cx88_dvb,cx22702,cx88xx
ir_common               6020  1 cx88xx
tveeprom                9604  1 cx88xx
v4l1_compat            15620  1 cx8800
v4l2_common             6912  1 cx8800
btcx_risc               5896  3 cx8802,cx8800,cx88xx
videodev               11136  3 cx88_blackbird,cx8800,cx88xx
snd_intel8x0           34720  0
snd_ac97_codec         78304  1 snd_intel8x0
snd_pcm_oss            55844  0
snd_mixer_oss          21504  1 snd_pcm_oss
snd_pcm               100484  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              27396  1 snd_pcm
snd_page_alloc         11140  2 snd_intel8x0,snd_pcm
i2c_i801                9740  0
ehci_hcd               35076  0
shpchp                103684  0
pci_hotplug            36028  1 shpchp
pcspkr                  4684  0
evdev                  10752  0
uhci_hcd               35600  0
ext3                  142472  3
jbd                    66456  1 ext3
mbcache                 9604  1 ext3
unix                   30356  50



Am Freitag, den 07.01.2005, 20:45 +0100 schrieb rupert:
> Hi,
> yesterday i updated to the latest 2.6.10 kernel and used the patches
> from bytesex.
> I also compiled ffmpeg, directfb (++) and the softdevice new, all from
> cvs.
> When I now start vdr i can see the OSD but no TV picture at all,
> softdevice is set to YUV.
> The only usefull message i could find was this  
> 
> ERROR: device 1 has no lock, can't attach receiver!
> 
> what is vdr telling me?
> 
> with the old kernel and the old softdevice all run better,
> but when I now start the old rc2 kernel the same happens :(.
> 
> ----
> (*) DirectFB/Core: Multi Application Core. (2005-01-07 19:19)
> (*) Direct/Memcpy: Using MMXEXT optimized memcpy()
> (*) Direct/Thread: Running 'Fusion Dispatch' (MESSAGING, 4605)...
> (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 4616)...
> (*) Direct/Modules: suppress module 'joystick'
> (*) Direct/Modules: suppress module 'lirc'
> (*) Direct/Modules: suppress module 'ps2mouse'
> (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 4617)...
> (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
> (*) DirectFB/Genefx: MMX detected and enabled
> (*) DirectFB/Graphics: Matrox G450 0.7 (convergence integrated media
> GmbH)
> (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
> [dfb] RAM: 16777216 bytes
> [dfb] Accellerated Functions: FillRectange DrawRectange DrawLine
> FillTriangle Blit StretchBlit All
> [dfb] Drawing Flags: Blend
> [dfb] Surface Blitting Flags: BlendAlpha BlendColorAlpha Colorize
> SrcColorkey Deinterlace
> [dfb] Supported video Modes are: 640x480@16 720x576@16 768x576@16
> 800x600@16 1024x768@16 1280x1024@16 1280x1024@16 1600x1200@16 640x400@16
> 400x300@16 320x240@16 320x200@16
> [dfb] Enumeratig display Layers
> Layer 2 FBDev Primary Layer  Type: graphics
>   Caps: brightness contrast saturation surface
> Layer 1 Matrox Backend Scaler  Type: graphics picture video
>   Caps: brightness contrast deinterlacing dst_colorkey screen_location
> surface
> Layer 0 Matrox CRTC2 Layer  Type: graphics picture video
>   Caps: brightness contrast flicker_filtering hue saturation surface
> [dfb] width = 720, height = 576
> [dfb] got fmt = 0x00418c04 bpp = 32
> [dfb] Using this layer for OSD: (Matrox CRTC2 Layer - [720x576])
> osdSurface::
>  - videoonly
>  - flipping
> videoSurface::
>  - videoonly
> [dfb] Configuring CooperativeLevel for Overlay
> [dfb] Configuring ColorKeying
> [dfb] Configuring CooperativeLevel for OSD
> [dfb] Using this layer for OSD: Matrox CRTC2 Layer
> [dfb] Using this layer for Video out: Matrox CRTC2 Layer
> [dfb] (re)configuring Videolayer to 720 x 576 (720x576)
> [dfb] creating new surface
> [dfb] (re)configured 0x00200806
> [softdevice] Video Out seems to be OK
> [softdevice] Initializing Audio Out
> [softdevice] Audio out seems to be OK
> [softdevice] A/V devices initialized, now initializing MPEG2 Decoder
> cSoftDevice::MakePrimaryDevice
> 
> --
> here it stops when i run vdr, i can remember there where more when i
> worked.
> 
> thx
> 
>