[vdr] Re: device 1 has no lock, can't attach receiver? cx88

[rupert <h.engemann@az-lantech.de>]

it works, now.
sorry for using space and bandwidth.


Am Freitag, den 07.01.2005, 20:55 +0100 schrieb rupert:
> I use a Nova-t with connexant chipset and vdr. 1.3.17.
> 
> I also missed to attach this:
> 
> ipv6                  269568  12
> cx88_dvb                7940  0
> mt352                   6916  1 cx88_dvb
> video_buf_dvb           7684  1 cx88_dvb
> dvb_core               86184  1 video_buf_dvb
> cx22702                11140  1 cx88_dvb
> cx88_blackbird         16900  0
> cx8802                 11780  2 cx88_dvb,cx88_blackbird
> firmware_class         11392  1 cx88_blackbird
> cx8800                 33036  0
> cx88xx                 56220  4 cx88_dvb,cx88_blackbird,cx8802,cx8800
> video_buf              23300  6
> cx88_dvb,video_buf_dvb,cx88_blackbird,cx8802,cx8800,cx88xx
> dvb_pll                 4996  3 cx88_dvb,cx22702,cx88xx
> ir_common               6020  1 cx88xx
> tveeprom                9604  1 cx88xx
> v4l1_compat            15620  1 cx8800
> v4l2_common             6912  1 cx8800
> btcx_risc               5896  3 cx8802,cx8800,cx88xx
> videodev               11136  3 cx88_blackbird,cx8800,cx88xx
> snd_intel8x0           34720  0
> snd_ac97_codec         78304  1 snd_intel8x0
> snd_pcm_oss            55844  0
> snd_mixer_oss          21504  1 snd_pcm_oss
> snd_pcm               100484  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
> snd_timer              27396  1 snd_pcm
> snd_page_alloc         11140  2 snd_intel8x0,snd_pcm
> i2c_i801                9740  0
> ehci_hcd               35076  0
> shpchp                103684  0
> pci_hotplug            36028  1 shpchp
> pcspkr                  4684  0
> evdev                  10752  0
> uhci_hcd               35600  0
> ext3                  142472  3
> jbd                    66456  1 ext3
> mbcache                 9604  1 ext3
> unix                   30356  50
> 
> 
> 
> Am Freitag, den 07.01.2005, 20:45 +0100 schrieb rupert:
> > Hi,
> > yesterday i updated to the latest 2.6.10 kernel and used the patches
> > from bytesex.
> > I also compiled ffmpeg, directfb (++) and the softdevice new, all from
> > cvs.
> > When I now start vdr i can see the OSD but no TV picture at all,
> > softdevice is set to YUV.
> > The only usefull message i could find was this  
> > 
> > ERROR: device 1 has no lock, can't attach receiver!
> > 
> > what is vdr telling me?
> > 
> > with the old kernel and the old softdevice all run better,
> > but when I now start the old rc2 kernel the same happens :(.
> > 
> > ----
> > (*) DirectFB/Core: Multi Application Core. (2005-01-07 19:19)
> > (*) Direct/Memcpy: Using MMXEXT optimized memcpy()
> > (*) Direct/Thread: Running 'Fusion Dispatch' (MESSAGING, 4605)...
> > (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 4616)...
> > (*) Direct/Modules: suppress module 'joystick'
> > (*) Direct/Modules: suppress module 'lirc'
> > (*) Direct/Modules: suppress module 'ps2mouse'
> > (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 4617)...
> > (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
> > (*) DirectFB/Genefx: MMX detected and enabled
> > (*) DirectFB/Graphics: Matrox G450 0.7 (convergence integrated media
> > GmbH)
> > (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
> > [dfb] RAM: 16777216 bytes
> > [dfb] Accellerated Functions: FillRectange DrawRectange DrawLine
> > FillTriangle Blit StretchBlit All
> > [dfb] Drawing Flags: Blend
> > [dfb] Surface Blitting Flags: BlendAlpha BlendColorAlpha Colorize
> > SrcColorkey Deinterlace
> > [dfb] Supported video Modes are: 640x480@16 720x576@16 768x576@16
> > 800x600@16 1024x768@16 1280x1024@16 1280x1024@16 1600x1200@16 640x400@16
> > 400x300@16 320x240@16 320x200@16
> > [dfb] Enumeratig display Layers
> > Layer 2 FBDev Primary Layer  Type: graphics
> >   Caps: brightness contrast saturation surface
> > Layer 1 Matrox Backend Scaler  Type: graphics picture video
> >   Caps: brightness contrast deinterlacing dst_colorkey screen_location
> > surface
> > Layer 0 Matrox CRTC2 Layer  Type: graphics picture video
> >   Caps: brightness contrast flicker_filtering hue saturation surface
> > [dfb] width = 720, height = 576
> > [dfb] got fmt = 0x00418c04 bpp = 32
> > [dfb] Using this layer for OSD: (Matrox CRTC2 Layer - [720x576])
> > osdSurface::
> >  - videoonly
> >  - flipping
> > videoSurface::
> >  - videoonly
> > [dfb] Configuring CooperativeLevel for Overlay
> > [dfb] Configuring ColorKeying
> > [dfb] Configuring CooperativeLevel for OSD
> > [dfb] Using this layer for OSD: Matrox CRTC2 Layer
> > [dfb] Using this layer for Video out: Matrox CRTC2 Layer
> > [dfb] (re)configuring Videolayer to 720 x 576 (720x576)
> > [dfb] creating new surface
> > [dfb] (re)configured 0x00200806
> > [softdevice] Video Out seems to be OK
> > [softdevice] Initializing Audio Out
> > [softdevice] Audio out seems to be OK
> > [softdevice] A/V devices initialized, now initializing MPEG2 Decoder
> > cSoftDevice::MakePrimaryDevice
> > 
> > --
> > here it stops when i run vdr, i can remember there where more when i
> > worked.
> > 
> > thx
> > 
> > 
> 
> 
>