[vdr] softdevice-0.0.8.tgz problems with mgatv

[<Malte.Grunwald@beb.de>]

 <<softdevice.txt>> Hallo,

I have followed the list to use my Matrox G450 tv-out.
I have used the tar-ball with the 0.0.8-Version
together with vdr-1.3.15 and vdr-1.3.18 (after applying the
patch from the list).

It is just not working. In the attachment I have the error (with vdr
1.3.18), syslog and
my /etc/directfb and part of vdr's setup.conf. I do not see what is
missing compared to
the configurations posted on the list.

Thank you for any help
Malte

P.S. I have a Suse 9.0. It tried vanilla 2.6.10-rc1 & 2.6.10   
./vdr -P"softdevice -vo dfb:mgatv"
[softdevice] processing args
[softdevice]   argv [0] = softdevice
[softdevice]   argv [1] = -vo
[setup-softdevice] alsa device set to: default
[setup-softdevice] A/V Offset set to (0)
[setup-softdevice] cropping mode set to 0 (none)
[setup-softdevice] deinterlace method set to 0 none
[softdevice] picture mirroring set to 0 (off)
[setup-softdevice] pixel format set to (YUV2)
[setup-softdevice] startup aspect set to (4:3 normal)
[softdevice] initializing Plugin
[softdevice] Initializing Video Out
[softdevice] ffmpeg version(0.4.9-pre1) build(4721)
[dfb] init
(*) DirectFB/Config: Parsing config file '/etc/directfbrc'.

       ---------------------- DirectFB v0.9.21 ---------------------
             (c) 2000-2002  convergence integrated media GmbH
             (c) 2002-2004  convergence GmbH
        -----------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2005-01-09 19:48)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 18463)...
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 18466)...
 (!!!)  *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [reactor.c:802]
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 18467)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: Matrox G450 0.7 (convergence integrated media GmbH)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
[dfb] RAM: 8388608 bytes
[dfb] Accellerated Functions: FillRectange DrawRectange DrawLine FillTriangle Blit StretchBlit All
[dfb] Drawing Flags: Blend
[dfb] Surface Blitting Flags: BlendAlpha BlendColorAlpha Colorize SrcColorkey Deinterlace
[dfb] Supported video Modes are: 720x576@16 640x480@16 768x576@16 800x600@16 1024x768@16 1280x1024@16 1280x1024@16 1600x1200@16 640x400@16 400x300@16 320x240@16 320x200@16
[dfb] Enumeratig display Layers
Layer 2 FBDev Primary Layer  Type: graphics
  Caps: brightness contrast saturation surface
Layer 1 Matrox Backend Scaler  Type: graphics picture video
  Caps: brightness contrast deinterlacing dst_colorkey screen_location surface
Layer 0 Matrox CRTC2 Layer  Type: graphics picture video
  Caps: brightness contrast flicker_filtering hue saturation surface
[dfb] width = 720, height = 576
[dfb] got fmt = 0x00418c04 bpp = 32
(!) [18446:    0.000] --> Caught signal 6 (sent by pid 18446, uid 0) <--
Killed


mode=720x576
depth=32
primary-layer=2
matrox-crtc2
#matrox-sgram
matrox-tv-standard=pal


Jan 12 00:03:58 urmel vdr[18446]: initializing plugin: softdevice (0.0.8): A software emulated MPEG2 device
Jan 12 00:03:59 urmel vdr[18450]: Section handler thread started (pid=18450, tid=32771)
Jan 12 00:03:59 urmel kernel: matroxfb: cannot set xres to 720, rounded up to 736
Jan 12 00:03:59 urmel kernel: matroxfb: cannot set xres to 400, rounded up to 416
Jan 12 00:04:04 urmel kernel: i2c_adapter i2c-0: master_xfer: with 1 msgs.


softdevice.AlsaDevice = default
softdevice.avOffset = 0
softdevice.CropMode = 0
softdevice.Deinterlace Method = 0
softdevice.Picture mirroring = 0
softdevice.PixelFormat = 2
softdevice.SyncAllFrames = 0