[vdr] Re: VDR recording problem

["C.Y.M" <syphir@syphir.sytes.net>]

Ryan Mak wrote:
> # hdparm -i /dev/hdc
>
> /dev/hdc:
>
>  Model=WDC WD1200JB-00GVA0, FwRev=08.02D08,
> SerialNo=WD-WCALA1379567
>  Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed
> DTR>5Mbs FmtGapReq }
>  RawCHS=16383/16/63, TrkSize=57600, SectSize=600,
> ECCbytes=74
>  BuffType=DualPortCache, BuffSize=8192kB,
> MaxMultSect=16, MultSect=16
>  CurCHS=16383/16/63, CurSects=16514064, LBA=yes,
> LBAsects=234441648
>  IORDY=on/off, tPIO={min:120,w/IORDY:120},
> tDMA={min:120,rec:120}
>  PIO modes:  pio0 pio1 pio2 pio3 pio4
>  DMA modes:  mdma0 mdma1 mdma2
>  UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma5
>  AdvancedPM=no WriteCache=enabled
>  Drive conforms to: device does not report version:  1
> 2 3 4 5 6
Are you using a 40 or 80 pin conductor cable? My 2 cents..

Regards,