Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: VDR recording problem
the 80 pin cable that came with the drive.
my mobo supposively supports UDMA66 and I have an
older drive as a master on the primary IDE and this
drive as a master on the secondary IDE.
--- "C.Y.M" <syphir@syphir.sytes.net> wrote:
> Ryan Mak wrote:
> > # hdparm -i /dev/hdc
> >
> > /dev/hdc:
> >
> > Model=WDC WD1200JB-00GVA0, FwRev=08.02D08,
> > SerialNo=WD-WCALA1379567
> > Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl
> Fixed
> > DTR>5Mbs FmtGapReq }
> > RawCHS=16383/16/63, TrkSize=57600, SectSize=600,
> > ECCbytes=74
> > BuffType=DualPortCache, BuffSize=8192kB,
> > MaxMultSect=16, MultSect=16
> > CurCHS=16383/16/63, CurSects=16514064, LBA=yes,
> > LBAsects=234441648
> > IORDY=on/off, tPIO={min:120,w/IORDY:120},
> > tDMA={min:120,rec:120}
> > PIO modes: pio0 pio1 pio2 pio3 pio4
> > DMA modes: mdma0 mdma1 mdma2
> > UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma5
> > AdvancedPM=no WriteCache=enabled
> > Drive conforms to: device does not report
> version: 1
> > 2 3 4 5 6
> >
>
> Are you using a 40 or 80 pin conductor cable? My 2
> cents..
>
> Regards,
>
>
>
>
Home |
Main Index |
Thread Index