AVerMedia AVerTV Bravo Hybrid PCI-E

From LinuxTVWiki
Revision as of 17:41, 8 March 2013 by Devin.heitmueller (talk | contribs) (djh - remove references to no longer existing hg trees. The support went upstream years ago.)
Jump to navigation Jump to search
AVerMedia H788D

An ATSC PCIe card from AVerMedia.

It is currently unsupported under Linux.

Overview/Features

There are two versions of this card. A hybrid card (H788) which can handle ATSC/NTSC/QAM and a budget card (H788D) that can only handle ATSC/QAM.

Components Used

Identification

H788D

$ lspci -vvnn
03:00.0 Multimedia controller [0480]: Philips Semiconductors Device [1131:7160] (rev 03)
        Subsystem: Avermedia Technologies Inc Device [1461:0755]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at fd900000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: [40] MSI: Enable- Count=1/32 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [50] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        Capabilities: [74] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] Vendor Specific Information <?>
        Capabilities: [100] Vendor Specific Information <?>


Other Images

Making it Work

Firmware

Drivers

Sample Kernel Output

provide the relevant portion of dmesg here

Remote Controller Support

External Links