AVerMedia M103 (Hybrid) Mini PCI: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
Line 21: Line 21:
* Unbundled Remote Control Supported
* Unbundled Remote Control Supported
* PCI v2.3 interface
* PCI v2.3 interface



{{Note|This device has just one input using a BNC to u.FL pigtail, so no any other inputs such FM radio, S-Video and Remote.
{{Note|This device has just one input using a BNC to u.FL pigtail, so no any other inputs such FM radio, S-Video and Remote.
Also, this devices doesn't have any external Audio/Video outputs, so the Audio should be software piped (see later) to an other Audio device}}
Also, this devices doesn't have any external Audio/Video outputs, so the Audio should be software piped (see later) to an other Audio device}}



===Components Used===
===Components Used===
''The following ICs and modules used by the device:''<br>
''The following ICs and modules used by the device:''<br>
* Philips [[Philips SAA7134|SAA7134]] - Philips Video Decoder and Broadcast Audio Decoder / PCI bridge (for worldwide sku)
* XC3028 - Xceive Silicon Tuner (for Hybrid system)
* MT352 - Silicon Tuner - Zarlink DVB-T Demodulator (Digital Terrestrial TV Demodulator)
* [[Zarlink]] [[Zarlink MT352|MT352]] - Silicon Tuner - Zarlink DVB-T Demodulator (Digital Terrestrial TV Demodulator)
* [[Xceive]] [[Xceive XC3018|XC3018]] - Xceive Silicon Tuner (for Hybrid system)
* SAA7135H - Philips Video Decoder and Broadcast Audio Decoder / PCI bridge (for worldwide sku)


===Other Images===
===Other Images===

Revision as of 11:17, 9 April 2009

Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description

This is a Hybrid DVB-T Mini PCI card from AverMedia.

The AverMedia M103 is supported under Linux since kernel 2.6.24.

Overview/Features

This device is also known as "AverTV Hybrid DVB-T" or "Avermedia M103 (hybrid)".

TV

  • Analog TV: Worldwide Analog Access
  • Digital TV: DVB-T
  • Stereo Sound: Yes

Input/Output

  • Inputs: 75 ohm TV Antenna Input
  • Outputs: None

Features

  • Windows XP MCE Compliant (XP MCE Certificated)
  • Unbundled Remote Control Supported
  • PCI v2.3 interface
Note: This device has just one input using a BNC to u.FL pigtail, so no any other inputs such FM radio, S-Video and Remote. Also, this devices doesn't have any external Audio/Video outputs, so the Audio should be software piped (see later) to an other Audio device


Components Used

The following ICs and modules used by the device:

  • Philips SAA7134 - Philips Video Decoder and Broadcast Audio Decoder / PCI bridge (for worldwide sku)
  • Zarlink MT352 - Silicon Tuner - Zarlink DVB-T Demodulator (Digital Terrestrial TV Demodulator)
  • Xceive XC3018 - Xceive Silicon Tuner (for Hybrid system)

Other Images

Identification

Provide here, for PCI/PCIe devices, the relevant output of lspci -vnn or, in the case of USB devices, lsusb -v . We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:

#  sudo lspci -vvnn -s 04:07
04:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
	Subsystem: Avermedia Technologies Inc Device [1461:f636]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: saa7134
	Kernel modules: saa7134

Making it Work

Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)

Firmware

Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.

Drivers

Provide the details of where the drivers and patches and necessary tools are available.

Sample Kernel Output

Provide the relevant portion of dmesg here. For example:

# dmseg
[...]
[   26.903212] saa7130/34: v4l2 driver version 0.2.14 loaded
[   26.904817] saa7134 0000:04:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   26.904831] saa7133[0]: found at 0000:04:07.0, rev: 209, irq: 17, latency: 0, mmio: 0xfd8fe000
[   26.904838] saa7134 0000:04:07.0: setting latency timer to 64
[   26.904844] saa7133[0]: subsystem: 1461:f636, board: AVerMedia MiniPCI DVB-T Hybrid M103 [card=145,autodetected]
[   26.904858] saa7133[0]: board init: gpio is 220000
[   27.072671] saa7133[0]: i2c eeprom 00: 61 14 36 f6 00 00 00 00 00 00 00 00 00 00 00 00
[   27.072690] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[   27.072703] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 0e ff ff ff ff
[   27.072717] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072730] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[   27.072743] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072757] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072770] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072783] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072797] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072810] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072823] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072836] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072850] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072863] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072876] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.116022] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[   27.128129] saa7133[0]: i2c scan: found device @ 0xc2  [???]
[   27.232043] tuner' 0-0061: chip found @ 0xc2 (saa7133[0])
[   27.495472] xc2028 0-0061: creating new instance
[   27.495481] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   27.496778] firmware: requesting xc3028-v27.fw
[   27.849632] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[   27.868026] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[   36.508063] (0), id 00000000000000ff:
[   36.508071] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
[   36.676080] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[   37.116657] saa7133[0]: registered device video0 [v4l2]
[   37.117502] saa7133[0]: registered device vbi0
[   37.144805] saa7134 ALSA driver for DMA sound loaded
[   37.145363] saa7133[0]/alsa: saa7133[0] at 0xfd8fe000 irq 17 registered as card -2
[   37.272116] xc2028 0-0061: attaching existing instance
[   37.272123] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   37.272742] DVB: registering new adapter (saa7133[0])
[   37.272749] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[   37.273160] mt352: mt352_init: hello
[...]
[   43.900838] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
[   44.068521] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[   46.293245] mt352: mt352_init: hello
[...]

Remote Control Support

Discuss support for the remote control here.

External Links