DigitalRise DTV PCI Cab CI
- PCI interface
- Inputs: Antenna (Digital), Remote
- Outputs: Antenna
- CI Module
- Quantek QT1010 (tuner)
- Intel/Zarlink MT352 (demodulator)
- NXP/Philips SAA7130HL (A/V decoder and PCI Interface)
Provide here, for PCI/PCIe devices, the relevant output of
lspci -vnn or, in the case of USB devices,
lsusb -v . We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:
# lspci -vvvnn 00:0f.0 Multimedia controller : Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01) Subsystem: Twinhan Technology Co. Ltd Device [1822:0043] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min, 63750ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at cddff000 (32-bit, prefetchable) [size=4K] Kernel driver in use: Mantis
Making it Work
Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)
Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.
Provide the details of where the drivers and patches and necessary tools are available.
Sample Kernel Output
Provide the relevant portion of dmesg here. For example:
# dmesg [ 1930.935923] Mantis 0000:00:0f.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 1930.937095] DVB: registering new adapter (Mantis DVB adapter) [ 1931.818068] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
Remote Control Support
Discuss support for the remote control here.
Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example: