It is supported under Linux.
- IR receiver
- Microtune MT2060 tuner
- Dibcom DiB7700 DVB-T demodulator & USB 2.0 controller
|USB ID||Model no.||Version||Tuner||Supported from|
| Model 99063-001
|2040:7070||??|| Model 294 G
(Sold in Germany as Nova-T-lite)
|SL-294-V2.3-UK||BiP7070P||latest HG + [Manual patch (29th December 2007)]|
- One model number is above the MAC address on the label on the underside of the device.
- The other model number and the version information are on the base of the box, below the bar code.
Making it work
You will need the dvb-usb-dib0700-1.10.fw firmware file in /lib/firmware or the relevant place for your distribution.
For devices with box number 293 and device number 70009 the kernel may require firmware version dvb-usb-dib0700-01.fw. Rename the firmware linked above or put a link. Seems to work fine.
Status on 11 August 2007
Just use Mercurial by following the How_to_install_DVB_device_drivers instructions.
For the model 294G:
dvb_usb_dib0700 38152 0 dib7000p 23560 2 dvb_usb_dib0700 dib7000m 22404 1 dvb_usb_dib0700 dvb_usb 27020 1 dvb_usb_dib0700 dvb_core 82388 2 dvb_usb dib3000mc 20232 1 dvb_usb_dib0700 dibx000_common 11780 3 dib7000p,dib7000m,dib3000mc dib0070 15236 2 dvb_usb_dib0700
Sample kernel output
This is for the 70001 version, using the driver in Linux 22.214.171.124.
usb 1-10: new high speed USB device using ehci_hcd and address 8 usb 1-10: configuration #1 chosen from 1 choice dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw' dib0700: firmware started successfully. dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T Stick). DVB: registering frontend 2 (DiBcom 7000MA/MB/PA/PB/MC)... MT2060: successfully identified (IF1 = 1220) dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
This is for the model 294 G, using the driver in Linux 126.96.36.199 with a HG of v4l-dvb from 29th of December 2007.
usb 3-5: new high speed USB device using ehci_hcd and address 80 usb 3-5: configuration #1 chosen from 1 choice dib0700: loaded with support for 5 different device-types dvb-usb: found a 'DiBcom STK7070P reference design' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' dib0700: firmware started successfully. dvb-usb: found a 'DiBcom STK7070P reference design' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (DiBcom STK7070P reference design) DVB: registering frontend 0 (DiBcom 7000PC)... DiB0070: successfully identified dvb-usb: DiBcom STK7070P reference design successfully initialized and connected. usbcore: registered new interface driver dvb_usb_dib0700
Remote control support
Supported in v4l-dvb as of 18 August 2007. The 70001 version has an IR sensor, and the 70009 version is listed by Wikipedia as having one. It works with Hauppauge's 45-button remote control and will handle signals from similar remote controls.
If you have problems with a flood of "unknown key" messages in the kernel log, you'll also need this patch (it is not cleanly applicable to recent trees, but it is an easy one-liner to do by hand).