Hauppauge WinTV-NOVA-T USB: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
 
 
(23 intermediate revisions by 9 users not shown)
Line 1: Line 1:
[[image:Hauppauge WinTV-NOVA-T USB.jpg|thumb|Hauppauge WinTV-NOVA-T USB]]
A [[USB1.1]] [[DVB-T]] device designed by [[Technotrend]] and sold by [[Hauppauge]]. Based on a Texas Instruments [[DSP]] that remultiplexes the stream into a [[Technotrend]]-proprietary USB packet format and sends it as [[Isochronous USB Stream]] over the USB Bus.
A [[DVB-T]] [[DVB-T USB Devices|USB 1.1 device]] designed by [[TechnoTrend]] and sold by [[Hauppauge]].


It is supported under Linux.
As Tuner Module a [[Alps TDMB7]] is used.


==Overview/Features==
Due to the limited [[USB1.1]] [[Bus Bandwidth]] of about 12MBit only selected [[PID]]s can get transferred over the USB Bus to the Host. Some High-Bandwidth [[Transponder]]s don't work, HDTV receiption is not possible.
This device is a rebadge of the DVB-T member of TechnoTrend's TT-PCline USB family of devices, which were USB1.1 based and of the, so called, "budget" category.


It uses a Texas Instruments [[DSP]] that remultiplexes the stream into a [[TechnoTrend]]-proprietary USB packet format and sends it as [[Isochronous USB Stream]] over the bus.
Linux driver exists. Requires a [[Firmware]] that needs to get peeled out of the Windows Driver. A similiar [[DVB-S]] device is available, the [[WinTV-NOVA-S USB]].

Due to the limited [[Bus Bandwidth|bus bandwidth]] provided by [[Universal Serial Bus|USB 1.1]], of approximately 12Mbps, only selected [[PID]]s can be transferred over USB to the host system. Consequently, some high bandwidth [[Transponder|transponders]] won't work, and [[HDTV]] reception is not possible.


===Components Used===
* Alps TDMB7s tuner Module
** featuring either a [[Conexant]] [[Conexant CX22700|CX22700]] or [[NXP Semiconductors|NXP]] [[NXP TDA1004x#TDA10046|TDA10046]] ([[Demodulator|demodulator]] )
* a [[Texas Instruments]] [[DSP]] (USB bridge)

===Identification===
output of ''lsusb -v'':

===Hauppauge/TT Nova-USB-t budget===
(tda10046/Philips td1316(tda6651tt) OR cx22700/ALPS TDMB7(??))
features: partialts
board markings: "USB_DVB v1.92"
card driver: ttusb-budget
interface: USB1.1
USB device id: 0b48:1005
frontend possibility 1:
tin box: Philips td1316
frontend driver: tda1004x
demodulator location: separate
demodulator: Philips tda10046 @0x08
PLL: Philips tda6651tt @ 0x60
frontend possibility 2:
tin box: ALPS TDMB7
frontend driver: cx22700
demodulator location: tin box
demodulator: cx22700 @0x43
PLL: ?? @ 0x61
Notes: Need to disable the MC44BC374 (i2c:0x65) for the Philips td1316.
SAW filter is controlled by the tda10046's GPIO lines.
This device has only one frontend - but there are two possibilities
Although the hardware is capable of delivering the entire transport stream, the bandwidth of the USB bus prevents it



==Making it Work==

===Firmware===
Requires a [[Firmware]], dvb-fe-tda10046.fw, that needs to get peeled out of the Windows Driver.

===Drivers===
The following drivers are needed for these devices:
- cx22700.ko
- tda1004x.ko
- dvb-ttusb-budget.ko

==External Links==
*

[[Category:DVB-T USB Devices]]

Latest revision as of 11:05, 5 September 2009

Hauppauge WinTV-NOVA-T USB

A DVB-T USB 1.1 device designed by TechnoTrend and sold by Hauppauge.

It is supported under Linux.

Overview/Features

This device is a rebadge of the DVB-T member of TechnoTrend's TT-PCline USB family of devices, which were USB1.1 based and of the, so called, "budget" category.

It uses a Texas Instruments DSP that remultiplexes the stream into a TechnoTrend-proprietary USB packet format and sends it as Isochronous USB Stream over the bus.

Due to the limited bus bandwidth provided by USB 1.1, of approximately 12Mbps, only selected PIDs can be transferred over USB to the host system. Consequently, some high bandwidth transponders won't work, and HDTV reception is not possible.


Components Used

Identification

output of lsusb -v:

Hauppauge/TT Nova-USB-t budget

(tda10046/Philips td1316(tda6651tt) OR cx22700/ALPS TDMB7(??))

 features: partialts
 board markings: "USB_DVB v1.92"
 card driver: ttusb-budget
 interface: USB1.1
 USB device id: 0b48:1005
 frontend possibility 1:
   tin box: Philips td1316
   frontend driver: tda1004x
   demodulator location: separate
   demodulator: Philips tda10046 @0x08
   PLL: Philips tda6651tt @ 0x60
 frontend possibility 2:
   tin box: ALPS TDMB7
   frontend driver: cx22700
   demodulator location: tin box
   demodulator: cx22700 @0x43
   PLL: ?? @ 0x61
 Notes: Need to disable the MC44BC374 (i2c:0x65) for the Philips td1316.
        SAW filter is controlled by the tda10046's GPIO lines.
        This device has only one frontend - but there are two possibilities
        Although the hardware is capable of delivering the entire transport stream, the bandwidth of the USB bus prevents it


Making it Work

Firmware

Requires a Firmware, dvb-fe-tda10046.fw, that needs to get peeled out of the Windows Driver.

Drivers

The following drivers are needed for these devices:

 - cx22700.ko
 - tda1004x.ko
 - dvb-ttusb-budget.ko

External Links