Leadtek WinFast DTV2000DS PLUS
This is a dual tuner DVB-T PCI card. It uses an onboard VIA PCI-USB bridge so behaves like a USB device, with USB ID 0413:6f12.
It has the RealTek RTL2832U chipset, unlike its sibling the Leadtek WinFast DTV2000DS which has the Afatech AF9015 and AF9013 chipset. Therefore drivers for the non-plus version will certainly not work.
Note that the official Leadtek product page  falsely states that it has the AF9015 and AF9013.
The card is currently unsupported, but it is possible to get it working with the existing RTL2832U drivers - see below. It may be similar to the Mygica T1800B PCI card, since they have very similar general specifications.
Output of lsusb -v:
Bus 003 Device 002: ID 0413:6f12 Leadtek Research, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0413 Leadtek Research, Inc. idProduct 0x6f12 bcdDevice 1.00 iManufacturer 1 Realtek iProduct 2 WinFast DTV2000 DS Plus iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 4 USB2.0-Bulk&Iso bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 5 Bulk-In, Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 2 Device Status: 0x0000 (Bus Powered)
Use with Ambrosa's driver in Xubuntu 12.04
I have got this card to work using this driver  in Xubuntu 12.04 with the 22.214.171.124-generic kernel. I followed the instructions in the driver's README and made one minor edit. The full process is described here.
1- Install compile kit, linux headers and git
$ sudo apt-get install build-essential $ sudo apt-get install linux-headers-$(uname -r) $ sudo apt-get install git
2- clone the repository using git and go to source directory
$ git clone https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0.git $ cd DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0
3- edit Makefile to change the option INCLUDE_EXTRA_DVB to suit the 3.2 kernel. This means commenting out the line "INCLUDE_EXTRA_DVB := include-300" and uncommenting the line "INCLUDE_EXTRA_DVB := include-320". Obviously don't do this if you have a 3.0 kernel. (3.0 kernel is untested with this card).
4- Now the special step! Edit the header file rtl2832u.h so that our device is recognised. The simplest way is to find the line
"#define USB_PID_LEADTEK_WARM_2 0x6F11"
and change the last digit to 2 so it reads
"#define USB_PID_LEADTEK_WARM_2 0x6F12".
This means we have stolen the Product ID of another Leadtek device that uses this driver. Simply adding a new line like
"#define USB_PID_LEADTEK_WARM_4 0x6F12"
is not sufficient.
5- Now continue with the README instructions. Compile the code, install and insert the module.
$ make clean $ make $ sudo make install $ sudo modprobe dvb_usb_rtl2832u
The driver module should now load automatically each time you boot. This method worked with Scan and VLC. (Create a channels.conf file with scan, then open the file in VLC, or run $ vlc channels.conf).
The driver seems to cause problems with suspend.