LinuxTV:Help desk: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
(removed long since solved problem (i.e given his pics are in the 1030 article, Patrick obviously figured out how to upload them))
(removed old Twinhan question -- Leon found a work around (later he edited the 1020a article) and a descriptive answer to the problem was later added to the 1020 article)
Line 8: Line 8:
* Please sign with <nowiki>--~~~~</nowiki>.
* Please sign with <nowiki>--~~~~</nowiki>.


[[Category:Help]]


<!-- Questions below this line -->
<!-- Questions below this line -->
----
----

== How can I use ATSC DTV receiver on PowerPC? ==
== How can I use ATSC DTV receiver on PowerPC? ==


Line 31: Line 31:
I will send cxusb_fix_up mail to mailing-list.
I will send cxusb_fix_up mail to mailing-list.



==Twinhan / Brooktree 1020a with Debian Sid and Kernel 2.6.14==
I tried to install my DVB-S card on Linux: I set up my kernel with the needed modules and restart, but the kernel hangs up<br>
if the card was recognized.<br>
Output of lspci -v (only bt878 relevant devices)<pre>
0000:01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Unknown device fefe:0001
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at cfffe000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>

0000:01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Unknown device fefe:0001
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at cffff000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
</pre>
Which settings I need for this card? (maybe any service is the actuator for the kernel hangup)


== How do the LinuxTV changes migrate into the kernel? ==
== How do the LinuxTV changes migrate into the kernel? ==
Line 57: Line 39:
:When a new stable patch level kernel is released (i.e 2.6.20 ... and not the dot releases i.e 2.6.20.1 etc), there is a two week inclusion window for new drivers and features etc to make it into the next stable patch level kernel (i.e 2.6.21). After that window closes, the only other things that make it into the following stable dot release kernels (i.e. 2.6.20.1 --> 2.6.20.7 ...) and that next stable patch level kernel (i.e 2.6.21) are bug fixes. Only in extraordinary circumstances would something "new" be introduced outside that inclusion window -- it would need to be deemed essential.
:When a new stable patch level kernel is released (i.e 2.6.20 ... and not the dot releases i.e 2.6.20.1 etc), there is a two week inclusion window for new drivers and features etc to make it into the next stable patch level kernel (i.e 2.6.21). After that window closes, the only other things that make it into the following stable dot release kernels (i.e. 2.6.20.1 --> 2.6.20.7 ...) and that next stable patch level kernel (i.e 2.6.21) are bug fixes. Only in extraordinary circumstances would something "new" be introduced outside that inclusion window -- it would need to be deemed essential.
:Anyway, a typical cycle would be i) patch submission to a developer tree ii) after testing, pulled to Hg main line iii) in next inclusion window, added to stable kernel....things can be pulled earlier from Hg, but they will only be added to the non-stable kernels
:Anyway, a typical cycle would be i) patch submission to a developer tree ii) after testing, pulled to Hg main line iii) in next inclusion window, added to stable kernel....things can be pulled earlier from Hg, but they will only be added to the non-stable kernels



[[Category:Help]]

Revision as of 03:42, 19 April 2007

Welcome

new and old LinuxTV wikians. You have questions how to help with LinuxTV Wiki? Question about the articles or there meaning? Then this is the right place to ask. Ask your question, others will answer.

Please follow the following guidelines

  • Put new questions at the end.
  • Please give every question a headline (==Title of the question==).
  • If the question refers to a certain article a [[link]] there would be helpful.
  • Please sign with --~~~~.



How can I use ATSC DTV receiver on PowerPC?

I test below enviroment on PS3

* OS : Yellow Dog Linux 5.0
* receiver : DIVICO FusionHDTV gold usb
 - This receiver doing well on X86 linux(fedora 5 core)    

Question :

* What Kernel configuration need on or can I get kernel config file that succeeded on PS3?
* Is Kernel hacking needed?
* Can I get firmware file for receiver or device driver?
  If I can get it, please let me know where it is.
* Can I get source code of firmware for bluebird?

At last, I put the ax in the helve by myself. I will send cxusb_fix_up mail to mailing-list.


How do the LinuxTV changes migrate into the kernel?

It seems the HG tree will soon support the new kind of TerraTec Cinergy 1200 DVB-C.[1] When can I expect this support to be in the kernel? The latest stable kernel is 2.6.20.7 and the latest prepatch is 2.6.21-rc7, so is it reasonable to expect the card to work out of the box with 2.6.22? (I'd like to add this information to the page) --Lakefall 17:19, 18 April 2007 (CEST)

Yep, provided nothing comes up, then 2.6.22 would be the target. In the meantime, users can grab the Hg sources.
When a new stable patch level kernel is released (i.e 2.6.20 ... and not the dot releases i.e 2.6.20.1 etc), there is a two week inclusion window for new drivers and features etc to make it into the next stable patch level kernel (i.e 2.6.21). After that window closes, the only other things that make it into the following stable dot release kernels (i.e. 2.6.20.1 --> 2.6.20.7 ...) and that next stable patch level kernel (i.e 2.6.21) are bug fixes. Only in extraordinary circumstances would something "new" be introduced outside that inclusion window -- it would need to be deemed essential.
Anyway, a typical cycle would be i) patch submission to a developer tree ii) after testing, pulled to Hg main line iii) in next inclusion window, added to stable kernel....things can be pulled earlier from Hg, but they will only be added to the non-stable kernels