Pinnacle PCTV Pro: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
(Add pulseaudio audio redirect)
 
(7 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Image:Pctvpro.jpg|right|The "Pro" model with FM plug-in card]]
This article deals with the following analogue PCI cards from [[Miro]]/[[Pinnacle]]:
*Miro PCTV
*Miro PCTV
*Miro PCTV Pro
*Miro PCTV Pro
Line 4: Line 6:
*Pinnacle PCTV Pro
*Pinnacle PCTV Pro


They are supported under Linux.
These Miro and [[Pinnacle]] cards were the original PCTV series, produced from December 1997 onwareds. They are based on the [[Bt848]] chip. The PCTV Pro includes an FM radio chip.


==Overview/Feautres==
See also:
These [[Miro]] and [[Pinnacle]] cards were the original PCTV series, produced from December 1997 onwards. They are based on the [[Bt848]] chip (Also see [[Bttv devices (bt848, bt878)]]). The PCTV Pro model includes an FM radio chip.
*[[Bttv devices (bt848, bt878)]]


These cards feature:
[[Image:Pctvpro.jpg]]
* TV input: RF connector for a PAL/NTSC/SECAM ... (Resolution: 768x576 and 720x576 (PAL)) ... ??? with adapter to IEC connector (PAL)
<br/>''Pro model with FM plug-in card.''
* Video Input: S-Video, Composite Video (RCA socket)

==TODO==
* Sound: Needs to be redirected using [[sox]].
* Remote control, needs some configuration, and maybe [[lirc]]? See also [[Remote controllers]]

==Remote control==

[[Image:Pinnacle PCTV remote.jpg]]

The Pinnacle cards are supplied with a remote controller which seems to be the same as for [[Pinnacle PCTV 50i]]

==Card features==
* PCI
* PAL/NTSC/SECAM
* Video/audio decoder: [[bttv devices (bt848, bt878)|bt848]]
* Analog demodulator: [[MSP3410D-B4]] ([[msp3400]])
* TV tuner: Temic 4002 FH5 (also possibly Philips on some cards)
* FM radio chip (PRO only): MSP3410
* Supports 16:9-format (?)
* Resolution: 768x576 and 720x576 (PAL)
The card has no on board sound AD nor remote control input.

==Card connectors==
* TV RF signal: ??? with adapter to IEC connector (PAL)
* Video Input: S-Video
* Video Input: Composite Video (RCA socket)
* Audio Outputs: 3.5 mm jack
* Audio Outputs: 3.5 mm jack
* FM radio RF signal (PRO only): Internal RC jack with flying wire to IEC connector
* FM radio RF signal (PRO only): Internal RC jack with flying wire to IEC connector
* Video composite out (internal)
* Video composite out (internal)
* These Pinnacle cards are supplied with a remote controller which seems to be the same as for the [[Pinnacle PCTV 50i]].


==Connecting the card==
===Components Used===
* TV tuner: Temic 4002 FH5 (also possibly Philips on some cards)
* The TV antenna signal is connected to the antenna input.
* Analog demodulator: [[MSP3410D-B4]] ([[msp3400]])
* A cable (supplied) should be connected from the card audio output connector to a generic sound input (usually found on the main board).
* FM radio chip (PRO models only): MSP3410
* The remote control sensor cable (supplied) is connected to a 9 pin serial input (usually there is one on the main board).
* Video/audio decoder: [[bttv devices (bt848, bt878)|bt848]]


===Identification===
==lspci -v==
See the lspci output provided below.
00:0a.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)

Flags: bus master, medium devsel, latency 32, IRQ 21
==Making it work==
Memory at e2001000 (32-bit, prefetchable) [size=4K]
'''Connecting the card'''<br>
* The TV antenna signal is connected to the antenna input.
* The card has no on board sound A/D so a cable (supplied) should be connected from the card audio output connector to a generic sound input (on either your sound card or your motherboard). Sound will needs to be redirected using [[sox]] (also see the [[Talk:Pinnacle PCTV Pro|Talk page]] for some examples). Cards with a lookback option may also bypass this requirement.
* With pulse, you may also use pacat for this audio redirect, with the bonus point of being a pulse audio client, you can change the output device later on:


$ pactl list| grep -A3 -E "Sink #"| grep -A1 -E "Name: "
Name: alsa_output.usb-DeSheng_Electronics_Inc._WIN-U_2019.10.28-00.analog-stereo
Description: Audio Adapter (Unitek Y-247A) Analog Stereo
--
Name: alsa_output.pci-0000_00_14.2.analog-stereo
Description: Built-in Audio Analog Stereo
$ pacat -r --latency-msec=10 -d alsa_input.pci-0000_00_14.2.analog-stereo | pacat -p --latency-msec=10


* The card itself lacks an input for the remote control. Rather, the remote control sensor cable (supplied) is connected to a 9 pin serial input (usually there is one on your motherboard).
==Module Options==


=== card=11 ===
===Drivers===
===Module Options:===
==== card=11 ====
The cards may be detected automatically, but at least for the Pro card is is required to specify options explicitly in <tt>/etc/modules.cond</tt> (for Fedora, other distributions may do it differently):
The cards may be detected automatically, but at least for the Pro card is is required to specify options explicitly in <tt>/etc/modules.cond</tt> (for Fedora, other distributions may do it differently):


options bttv card=11 tuner=0
options bttv card=11 tuner=0


Kernel output:
=== card=39 ===


The card was autodetected by bttv as card=39, but didn't work. However when I added

options bttv card=39 tuner=33

it started working! Must be some bug, since only "tuner=33" didn't work either. Pinnacle PCTV Pro bought in Sweden (PAL).

==Kernel output==
bttv: driver version 0.9.16 loaded
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: using 8 buffers with 2080k (520 pages) each for capture
Line 91: Line 76:
bttv0: registered device radio1
bttv0: registered device radio1


lspci -v
==Links==
00:0a.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at e2001000 (32-bit, prefetchable) [size=4K]

==== card=39 ====
The card was autodetected by bttv as card=39, but didn't work. However when I added

options bttv card=39 tuner=33

it started working! Must be some bug, since only "tuner=33" didn't work either. Pinnacle PCTV Pro bought in Sweden (PAL).

All output from Ubuntu Hardy

Kernel output
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 17, latency: 16, mmio: 0xfdeff000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
msp3400 0-0040: MSP3410G-B11 found @ 0x80 (bt878 #0 [sw])
msp3400 0-0040: MSP3410G-B11 supports nicam and radio, mode is autodetect and autoselect
tuner 0-004b: chip found @ 0x96 (bt878 #0 [sw])
tda9887 0-004b: tda988[5/6/7] found @ 0x4b (tuner)
tuner 0-004b: type set to tda9887
Chip ID is not zero. It is not a TEA5767
tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
bttv0: tuner type=33
mt20xx 0-0060: microtune: companycode=3cbf part=42 rev=95
mt20xx 0-0060: microtune MT2050 found, OK
tuner 0-0060: type set to MT2050
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 . ok

lspci -v -nn
01:09.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver) [11bd:0012]
Flags: bus master, medium devsel, latency 16, IRQ 17
Memory at fdeff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

01:09.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio section) [11bd:0012]
Flags: medium devsel, IRQ 17
Memory at fdefe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

===Remote control===
[[Image:Pinnacle PCTV remote.jpg]]

===TODO===
* Remote control, needs some configuration, and maybe [[lirc]]? See also [[Remote controllers-V4L|Remote controllers]]

==External Links==
* http://linux.box.sk/faq_list.php?subject=Linux%20-%3E%20Hardware (slightly out of date)
* http://linux.box.sk/faq_list.php?subject=Linux%20-%3E%20Hardware (slightly out of date)
* http://www.mirosupport.de/media/pctv/pctv.html
* http://www.mirosupport.de/media/pctv/pctv.html
[[Category:Analog PCI Cards]]

Latest revision as of 00:09, 10 January 2022

The "Pro" model with FM plug-in card

This article deals with the following analogue PCI cards from Miro/Pinnacle:

  • Miro PCTV
  • Miro PCTV Pro
  • Pinnacle PCTV
  • Pinnacle PCTV Pro

They are supported under Linux.

Overview/Feautres

These Miro and Pinnacle cards were the original PCTV series, produced from December 1997 onwards. They are based on the Bt848 chip (Also see Bttv devices (bt848, bt878)). The PCTV Pro model includes an FM radio chip.

These cards feature:

  • TV input: RF connector for a PAL/NTSC/SECAM ... (Resolution: 768x576 and 720x576 (PAL)) ... ??? with adapter to IEC connector (PAL)
  • Video Input: S-Video, Composite Video (RCA socket)
  • Audio Outputs: 3.5 mm jack
  • FM radio RF signal (PRO only): Internal RC jack with flying wire to IEC connector
  • Video composite out (internal)
  • These Pinnacle cards are supplied with a remote controller which seems to be the same as for the Pinnacle PCTV 50i.

Components Used

  • TV tuner: Temic 4002 FH5 (also possibly Philips on some cards)
  • Analog demodulator: MSP3410D-B4 (msp3400)
  • FM radio chip (PRO models only): MSP3410
  • Video/audio decoder: bt848

Identification

See the lspci output provided below.

Making it work

Connecting the card

  • The TV antenna signal is connected to the antenna input.
  • The card has no on board sound A/D so a cable (supplied) should be connected from the card audio output connector to a generic sound input (on either your sound card or your motherboard). Sound will needs to be redirected using sox (also see the Talk page for some examples). Cards with a lookback option may also bypass this requirement.
  • With pulse, you may also use pacat for this audio redirect, with the bonus point of being a pulse audio client, you can change the output device later on:
   $ pactl list| grep -A3 -E "Sink #"| grep -A1 -E "Name: " 
       Name: alsa_output.usb-DeSheng_Electronics_Inc._WIN-U_2019.10.28-00.analog-stereo
       Description: Audio Adapter (Unitek Y-247A) Analog Stereo
   --
       Name: alsa_output.pci-0000_00_14.2.analog-stereo
       Description: Built-in Audio Analog Stereo
   $ pacat -r --latency-msec=10 -d alsa_input.pci-0000_00_14.2.analog-stereo  | pacat -p --latency-msec=10
  • The card itself lacks an input for the remote control. Rather, the remote control sensor cable (supplied) is connected to a 9 pin serial input (usually there is one on your motherboard).

Drivers

Module Options:

card=11

The cards may be detected automatically, but at least for the Pro card is is required to specify options explicitly in /etc/modules.cond (for Fedora, other distributions may do it differently):

 options bttv card=11 tuner=0

Kernel output:

 bttv: driver version 0.9.16 loaded
 bttv: using 8 buffers with 2080k (520 pages) each for capture
 bttv: Bt8xx card found (0).
 bttv0: Bt848 (rev 18) at 0000:00:0a.0, irq: 21, latency: 32, mmio: 0xe2001000
 bttv0: using: MIRO PCTV pro [card=11,insmod option]
 bttv0: gpio: en=00000000, out=00000000 in=00e707df [init]
 tuner 2-0060: All bytes are equal. It is not a TEA5767
 tuner 2-0060: chip found @ 0xc0 (bt848 #0 [sw])
 tuner 2-0061: chip found @ 0xc2 (bt848 #0 [sw])
 msp3400 2-0040: MSP3410D-B4 found @ 0x80 (bt848 #0 [sw])
 msp3400 2-0040: MSP3410D-B4 supports nicam, mode is autodetect
 bttv0: i2c: checking for MSP34xx @ 0x80... found
 bttv0: miro: id=1 tuner=0 radio=matchbox stereo=yes
 bttv0: using tuner=0
 tuner 2-0060: type set to 0 (Temic PAL (4002 FH5))
 bttv0: i2c: checking for MSP34xx @ 0x80... found
 bttv0: i2c: checking for TDA9875 @ 0xb0... not found
 bttv0: i2c: checking for TDA7432 @ 0x8a... not found
 bttv0: i2c: checking for TDA9887 @ 0x86... not found
 bttv0: registered device video1
 bttv0: registered device vbi1
 bttv0: registered device radio1

lspci -v

 00:0a.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)
 Flags: bus master, medium devsel, latency 32, IRQ 21
 Memory at e2001000 (32-bit, prefetchable) [size=4K]

card=39

The card was autodetected by bttv as card=39, but didn't work. However when I added

 options bttv card=39 tuner=33

it started working! Must be some bug, since only "tuner=33" didn't work either. Pinnacle PCTV Pro bought in Sweden (PAL).

All output from Ubuntu Hardy

Kernel output

 bttv: driver version 0.9.17 loaded
 bttv: using 8 buffers with 2080k (520 pages) each for capture
 bttv: Bt8xx card found (0).
 bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 17, latency: 16, mmio: 0xfdeff000
 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option]
 bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
 msp3400 0-0040: MSP3410G-B11 found @ 0x80 (bt878 #0 [sw])
 msp3400 0-0040: MSP3410G-B11 supports nicam and radio, mode is autodetect and autoselect
 tuner 0-004b: chip found @ 0x96 (bt878 #0 [sw])
 tda9887 0-004b: tda988[5/6/7] found @ 0x4b (tuner)
 tuner 0-004b: type set to tda9887
 Chip ID is not zero. It is not a TEA5767
 tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
 bttv0: i2c: checking for MSP34xx @ 0x80... found
 bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
 bttv0: tuner type=33
 mt20xx 0-0060: microtune: companycode=3cbf part=42 rev=95
 mt20xx 0-0060: microtune MT2050 found, OK
 tuner 0-0060: type set to MT2050
 bttv0: i2c: checking for MSP34xx @ 0x80... found
 bttv0: i2c: checking for TDA9875 @ 0xb0... not found
 bttv0: i2c: checking for TDA7432 @ 0x8a... not found
 bttv0: registered device video0
 bttv0: registered device vbi0
 bttv0: registered device radio0
 bttv0: PLL: 28636363 => 35468950 . ok

lspci -v -nn

 01:09.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
   Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver) [11bd:0012]
   Flags: bus master, medium devsel, latency 16, IRQ 17
   Memory at fdeff000 (32-bit, prefetchable) [size=4K]
   Capabilities: [44] Vital Product Data
   Capabilities: [4c] Power Management version 2
 01:09.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)
   Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio section) [11bd:0012]
   Flags: medium devsel, IRQ 17
   Memory at fdefe000 (32-bit, prefetchable) [size=4K]
   Capabilities: [44] Vital Product Data
   Capabilities: [4c] Power Management version 2

Remote control

Pinnacle PCTV remote.jpg

TODO

External Links