Radio Listening Software

From LinuxTVWiki
Revision as of 17:23, 18 April 2007 by Js (talk | contribs) (Reverted edits by MysPr9 (Talk); changed back to last version by Cockroach)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Radio applications

A number of v4l cards have a radio receiver/tuner.

The following applications control the tuner. Gnomeradio and kradio, the most fully featured applications, are not yet available in all distributions and need to be compiled first. Some of the older applications are mature and readily available, but no longer actively developed.


User experiences

If you're a user, post your installation and user experiences here!

gradio

I tried gradio on Debian amd64, as it's available; it's very basic. If you don't have the card on /dev/radio, start with

gradio -d /dev/radio2

No recording capability, stable gui, minimal functionality -- tuner and volume. I had to hand-edit the .gradiorc configuration file to get station presets; I may have missed some way of doing this through the gui.

gnomeradio

Clearly a more sophisticated application. There's only a debian package for i386, so I'll need to build from the tarball. Since I'm mainly interested in remote recording, I'll try fmtools and radio first.

fmtools

The package contains two binaries, fm and fmscan. To pick up all stations even with very weak reception, I issued,

$ fmscan -d /dev/radio2 fmscan -d /dev/radio3 -t 18 -i 0.1
Scanning range: 87.9 - 107.9 MHz (0.2 MHz increments)...

Nice and clean. I added an antenna, but still got weak reception. This is very useful for testing the radio and finding the stations; does it support directing the sound to a file? I try various combinations and end up with this to get 100% volume:

$ fm -d /dev/radio3 89.9 65535 
Radio tuned to 89.88 MHz at 100.00% volume

Weird. I don't see a way to record; do I need to use sox? I don't know if I'm getting any sound, as I don't have speakers on this box.

Sox is what gnomeradio uses to record and it thankfully sends commands it uses to standard out.

for wav file:

sox -c2 -w -r32000 -tossdsp /dev/audio -r 44100 -c 2 -w -twav /tmp/foo.wav

for mp3 or ogg:

sox -c2 -w -r32000 -tossdsp /dev/audio -r 44100 -c 2 -w -twav /tmp/fm_fifo &

and

lame -S -h -b 128 /tmp/fm_fifo /tmp/foo.mp3

or

oggenc -Q -b 128 -o /tmp/foo.ogg /tmp/fm_fifo

radio

The radio package has a single binary, radio. The man page says it looks for the kradio configuration file ~/.kde/share/config/kradiorc. Failing that, radio tries ~/.radio. I issue,

radio -c /dev/radio3

and get a blue and red curses screen, very cool. Arrow keys increase and decrease frequency in 0.05 intervals. I'm clearly not picking up any signal to speak of. I figure I have a lower-level issue with the tuner.