Talk:Compro VideoMate E700

From LinuxTVWiki
Revision as of 17:16, 30 March 2008 by JesseLukeWalker (talk | contribs) (New page: ==dmesg== Sorry for having to provide it all, I've looked over it a few times and can't see anything blatantly obvious. [ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gc...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

dmesg

Sorry for having to provide it all, I've looked over it a few times and can't see anything blatantly obvious.

[    0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
[    0.000000]  BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000F6D30 checksum 0
[    0.000000] ACPI: RSDP 000F6D30, 0014 (r0 Nvidia)
[    0.000000] ACPI: RSDT BFFF3000, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: FACP BFFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: DSDT BFFF30C0, 4C3F (r1 NVIDIA AWRDACPI     1000 MSFT  100000C)
[    0.000000] ACPI: FACS BFFF0000, 0040
[    0.000000] ACPI: MCFG BFFF7D80, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: APIC BFFF7D00, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000000bfff0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-00000000bfff0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   786416
[    0.000000] On node 0 totalpages: 786319
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1126 pages reserved
[    0.000000]   DMA zone: 2817 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 771625 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[    0.000000] Built 1 zonelists.  Total pages: 774442
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[   74.016940] time.c: Detected 2010.317 MHz processor.
[   74.018169] Console: colour VGA+ 80x25
[   74.018187] Checking aperture...
[   74.018191] CPU 0: aperture @ cd10000000 size 32 MB
[   74.018193] Aperture too small (32 MB)
[   74.023273] No AGP bridge found
[   74.060303] Memory: 3089820k/3145664k available (2274k kernel code, 55456k reserved, 1181k data, 296k init)
[   74.060356] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   74.138855] Calibrating delay using timer specific routine.. 4023.08 BogoMIPS (lpj=8046163)
[   74.138890] Security Framework v1.0.0 initialized
[   74.138899] SELinux:  Disabled at boot.
[   74.139235] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   74.142498] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   74.144384] Mount-cache hash table entries: 256
[   74.144536] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   74.144538] CPU: L2 Cache: 512K (64 bytes/line)
[   74.144541] CPU 0/0 -> Node 0
[   74.144543] CPU: Physical Processor ID: 0
[   74.144545] CPU: Processor Core ID: 0
[   74.144563] SMP alternatives: switching to UP code
[   74.144887] Early unpacking initramfs... done
[   74.453248] ACPI: Core revision 20070126
[   74.453308] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   74.496971] Using local APIC timer interrupts.
[   74.546681] result 12564480
[   74.546683] Detected 12.564 MHz APIC timer.
[   74.550646] SMP alternatives: switching to SMP code
[   74.550815] Booting processor 1/2 APIC 0x1
[   74.560534] Initializing CPU#1
[   74.638173] Calibrating delay using timer specific routine.. 4020.87 BogoMIPS (lpj=8041755)
[   74.638180] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   74.638182] CPU: L2 Cache: 512K (64 bytes/line)
[   74.638185] CPU 1/1 -> Node 0
[   74.638187] CPU: Physical Processor ID: 0
[   74.638188] CPU: Processor Core ID: 1
[   74.638274] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[   74.642524] Brought up 2 CPUs
[   76.112995] migration_cost=328
[   76.113552] NET: Registered protocol family 16
[   76.113642] ACPI: bus type pci registered
[   76.113648] PCI: Using configuration type 1
[   76.114689] ACPI: EC: Look up EC in DSDT
[   76.120118] ACPI: Interpreter enabled
[   76.120121] ACPI: (supports S0 S1 S4 S5)
[   76.120137] ACPI: Using IOAPIC for interrupt routing
[   76.127962] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   76.127969] PCI: Probing PCI hardware (bus 00)
[   76.128380] PCI: Transparent bridge - 0000:00:09.0
[   76.128703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   76.128945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   76.177903] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[   76.178047] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   76.178190] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[   76.178330] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   76.178471] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   76.178613] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[   76.178753] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   76.178896] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[   76.179042] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[   76.179182] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   76.179324] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[   76.179466] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[   76.179607] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   76.179755] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[   76.179903] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[   76.180050] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   76.180211] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[   76.180365] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[   76.180520] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[   76.180674] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[   76.180775] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[   76.180935] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[   76.181093] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[   76.181251] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[   76.181414] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[   76.181572] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[   76.181730] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[   76.181888] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[   76.182045] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[   76.182209] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[   76.182372] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[   76.182540] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[   76.182635] Linux Plug and Play Support v0.97 (c) Adam Belay
[   76.182650] pnp: PnP ACPI init
[   76.182661] ACPI: bus type pnp registered
[   76.186353] pnp: PnP ACPI: found 12 devices
[   76.186356] ACPI: ACPI bus type pnp unregistered
[   76.186416] PCI: Using ACPI for IRQ routing
[   76.186420] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   76.186499] NET: Registered protocol family 8
[   76.186501] NET: Registered protocol family 20
[   76.186617] pnp: 00:01: ioport range 0x1000-0x107f has been reserved
[   76.186620] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[   76.186623] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[   76.186626] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
[   76.186634] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[   76.186637] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[   76.186647] pnp: 00:0a: iomem range 0xd0000000-0xdfffffff could not be reserved
[   76.186652] pnp: 00:0b: iomem range 0xd1800-0xd3fff has been reserved
[   76.186655] pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[   76.186658] pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[   76.186660] pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[   76.186945] PCI: Bridge: 0000:00:09.0
[   76.186947]   IO window: disabled.
[   76.186951]   MEM window: f3000000-f30fffff
[   76.186953]   PREFETCH window: disabled.
[   76.186955] PCI: Bridge: 0000:00:0b.0
[   76.186957]   IO window: 9000-9fff
[   76.186960]   MEM window: disabled.
[   76.186961]   PREFETCH window: disabled.
[   76.186964] PCI: Bridge: 0000:00:0c.0
[   76.186965]   IO window: disabled.
[   76.186968]   MEM window: f3100000-f31fffff
[   76.186971]   PREFETCH window: disabled.
[   76.186973] PCI: Bridge: 0000:00:0d.0
[   76.186975]   IO window: 8000-8fff
[   76.186977]   MEM window: disabled.
[   76.186979]   PREFETCH window: disabled.
[   76.186984] PCI: Bridge: 0000:00:0e.0
[   76.186986]   IO window: a000-afff
[   76.186989]   MEM window: f0000000-f2ffffff
[   76.186991]   PREFETCH window: e0000000-efffffff
[   76.186998] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   76.187006] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   76.187011] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   76.187017] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   76.187022] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   76.187075] NET: Registered protocol family 2
[   76.189114] Time: acpi_pm clocksource has been installed.
[   76.221445] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   76.223153] TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
[   76.234821] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   76.235745] TCP: Hash tables configured (established 524288 bind 65536)
[   76.235750] TCP reno registered
[   76.245451] checking if image is initramfs... it is
[   76.857498] Freeing initrd memory: 7706k freed
[   76.864378] audit: initializing netlink socket (disabled)
[   76.864395] audit(1206894059.804:1): initialized
[   76.866522] VFS: Disk quotas dquot_6.5.1
[   76.866573] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   76.866657] io scheduler noop registered
[   76.866659] io scheduler anticipatory registered
[   76.866661] io scheduler deadline registered
[   76.866754] io scheduler cfq registered (default)
[   76.867582] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
[   76.867593] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[   76.867599] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
[   76.867605] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[   76.867611] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
[   76.867617] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[   76.867623] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
[   76.867630] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[   76.867638] Boot video device is 0000:05:00.0
[   76.867803] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   76.867821] assign_interrupt_mode Found MSI capability
[   76.867824] Allocate Port Service[0000:00:0b.0:pcie00]
[   76.867896] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   76.867913] assign_interrupt_mode Found MSI capability
[   76.867916] Allocate Port Service[0000:00:0c.0:pcie00]
[   76.867972] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   76.867989] assign_interrupt_mode Found MSI capability
[   76.867991] Allocate Port Service[0000:00:0d.0:pcie00]
[   76.868044] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   76.868060] assign_interrupt_mode Found MSI capability
[   76.868062] Allocate Port Service[0000:00:0e.0:pcie00]
[   76.893116] Real Time Clock Driver v1.12ac
[   76.893222] Linux agpgart interface v0.102 (c) Dave Jones
[   76.893225] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   76.893317] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   76.893463] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   76.893943] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   76.894688] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   76.894830] input: Macintosh mouse button emulation as /class/input/input0
[   76.894949] PNP: No PS/2 controller found. Probing ports directly.
[   77.148666] serio: i8042 KBD port at 0x60,0x64 irq 1
[   77.148814] mice: PS/2 mouse device common for all mice
[   77.148961] TCP cubic registered
[   77.149013] NET: Registered protocol family 1
[   77.149238] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   77.149249] Freeing unused kernel memory: 296k freed
[   78.331134] AppArmor: AppArmor initialized<5>audit(1206894061.272:2):  type=1505 info="AppArmor initialized" pid=1247
[   78.337883] fuse init (API version 7.8)
[   78.342879] Failure registering capabilities with primary security module.
[   78.858021] usbcore: registered new interface driver usbfs
[   78.858060] usbcore: registered new interface driver hub
[   78.858097] usbcore: registered new device driver usb
[   78.859620] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[   78.859631] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
[   78.859957] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   78.859965] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   78.860176] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   78.860209] ehci_hcd 0000:00:02.1: debug port 1
[   78.860213] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   78.860225] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000
[   78.860231] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   78.860344] usb usb1: configuration #1 chosen from 1 choice
[   78.860372] hub 1-0:1.0: USB hub found
[   78.860380] hub 1-0:1.0: 10 ports detected
[   78.875055] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   78.875065] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   78.876547] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   78.888258] SCSI subsystem initialized
[   78.893567] libata version 2.21 loaded.
[   78.919894] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[   78.967851] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[   78.967866] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
[   78.968129] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   78.968138] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   78.968216] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[   78.968237] ohci_hcd 0000:00:02.0: irq 22, io mem 0xf3201000
[   79.029595] usb usb2: configuration #1 chosen from 1 choice
[   79.029746] hub 2-0:1.0: USB hub found
[   79.029755] hub 2-0:1.0: 10 ports detected
[   79.135575] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[   79.135597] NFORCE-CK804: chipset revision 242
[   79.135600] NFORCE-CK804: not 100% native mode: will probe irqs later
[   79.135606] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
[   79.135616]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[   79.135625]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[   79.135633] Probing IDE interface ide0...
[   79.454891] usb 2-9: new low speed USB device using ohci_hcd and address 2
[   79.676467] usb 2-9: configuration #1 chosen from 1 choice
[   79.688905] usbcore: registered new interface driver hiddev
[   79.694739] input: Logitech USB Receiver as /class/input/input1
[   79.694754] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-9
[   79.704347] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: Fixing up Logitech keyboard report descriptor
[   79.704988] input: Logitech USB Receiver as /class/input/input2
[   79.705317] input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-9
[   79.705330] usbcore: registered new interface driver usbhid
[   79.705334] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   79.706715] Probing IDE interface ide1...
[   80.281045] sata_nv 0000:00:07.0: version 3.4
[   80.281420] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[   80.281430] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
[   80.281435] sata_nv 0000:00:07.0: Using ADMA mode
[   80.281755] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   80.281979] scsi0 : sata_nv
[   80.282034] scsi1 : sata_nv
[   80.282107] ata1: SATA max UDMA/133 cmd 0xffffc2000142a480 ctl 0xffffc2000142a4a0 bmdma 0x000000000001d000 irq 21
[   80.282112] ata2: SATA max UDMA/133 cmd 0xffffc2000142a580 ctl 0xffffc2000142a5a0 bmdma 0x000000000001d008 irq 21
[   80.749922] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   80.771496] ata1.00: Host Protected Area detected:
[   80.771498] 	current size: 976771055 sectors
[   80.771500] 	native size: 976773168 sectors
[   80.771716] ata1.00: native size increased to 976773168 sectors
[   80.771723] ata1.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[   80.771726] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   80.790180] ata1.00: configured for UDMA/133
[   81.261533] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   81.425486] ata2.00: ATAPI: ASUS    DRW-2014L1T, 1.00, max UDMA/66
[   81.597368] ata2.00: configured for UDMA/66
[   81.597492] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[   81.597501] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[   81.597690] scsi 1:0:0:0: CD-ROM            ASUS     DRW-2014L1T      1.00 PQ: 0 ANSI: 5
[   81.597703] ata2: bounce limit 0xFFFFFFFF, segment boundary 0xFFFF, hw segs 127
[   81.598418] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[   81.598427] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
[   81.598432] sata_nv 0000:00:08.0: Using ADMA mode
[   81.598701] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   81.598824] scsi2 : sata_nv
[   81.599153] scsi3 : sata_nv
[   81.599371] ata3: SATA max UDMA/133 cmd 0xffffc2000142c480 ctl 0xffffc2000142c4a0 bmdma 0x000000000001e400 irq 20
[   81.599377] ata4: SATA max UDMA/133 cmd 0xffffc2000142c580 ctl 0xffffc2000142c5a0 bmdma 0x000000000001e408 irq 20
[   82.068930] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   82.077001] ata3.00: ATA-7: WDC WD2000JS-00MHB0, 02.01C03, max UDMA/133
[   82.077004] ata3.00: 390721968 sectors, multi 16: LBA48 
[   82.084991] ata3.00: configured for UDMA/133
[   82.396676] ata4: SATA link down (SStatus 0 SControl 300)
[   82.396406] scsi 2:0:0:0: Direct-Access     ATA      WDC WD2000JS-00M 02.0 PQ: 0 ANSI: 5
[   82.396413] ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[   82.397543] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[   82.397547] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
[   82.397554] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   82.397564] forcedeth: using HIGHDMA
[   82.408713] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   82.409402] sd 0:0:0:0: [sda] Write Protect is off
[   82.409406] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   82.409427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   82.409501] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   82.409509] sd 0:0:0:0: [sda] Write Protect is off
[   82.409511] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   82.409522] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   82.409527]  sda: sda1 sda2
[   82.417817] sd 0:0:0:0: [sda] Attached SCSI disk
[   82.418040] sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
[   82.418063] sd 2:0:0:0: [sdb] Write Protect is off
[   82.418066] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   82.418079] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   82.418126] sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
[   82.418133] sd 2:0:0:0: [sdb] Write Protect is off
[   82.418136] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   82.418147] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   82.418152]  sdb:sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[   82.422289] Uniform CD-ROM driver Revision: 3.20
[   82.422460] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   82.432259]  sdb1
[   82.432644] sd 2:0:0:0: [sdb] Attached SCSI disk
[   82.436624] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   82.436658] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   82.436680] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   82.920777] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0
[   83.660942] ISO 9660 Extensions: Microsoft Joliet Level 3
[   83.703063] ISO 9660 Extensions: RRIP_1991A
[   83.950517] Registering unionfs 1.4
[   83.950522] unionfs: debugging is not enabled
[   83.958008] loop: module loaded
[   84.240490] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher
[  131.084106] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  131.153957] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  131.328861] ieee80211_crypt: registered algorithm 'NULL'
[  131.373347] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[  131.373378] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[  131.437371] input: PC Speaker as /class/input/input3
[  131.571798] ieee80211: 802.11 data/management/control stack, git-1.1.13
[  131.571804] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[  131.695945] parport_pc 00:09: reported by Plug and Play ACPI
[  131.695991] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[  131.786101] bcm43xx driver
[  131.786434] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[  131.786443] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
[  131.857791] irda_init()
[  131.857816] NET: Registered protocol family 23
[  132.328689] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[  132.328698] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
[  132.329001] PCI: Setting latency timer of device 0000:00:04.0 to 64
[  132.650269] intel8x0_measure_ac97_clock: measured 54707 usecs
[  132.650273] intel8x0: clocking to 46892
[  135.301817] No dock devices found.
[  135.334744] input: Power Button (FF) as /class/input/input4
[  135.334767] ACPI: Power Button (FF) [PWRF]
[  135.334818] input: Power Button (CM) as /class/input/input5
[  135.334831] ACPI: Power Button (CM) [PWRB]
[  135.985055] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
[  135.985352] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x8
[  135.985358] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
[  139.168840] lp0: using parport0 (interrupt-driven).
[  139.771004] ppdev: user-space parallel port driver
[  141.838060] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  142.427999] Failure registering capabilities with primary security module.
[  143.073022] Bluetooth: Core ver 2.11
[  143.073348] NET: Registered protocol family 31
[  143.073351] Bluetooth: HCI device and connection manager initialized
[  143.073357] Bluetooth: HCI socket layer initialized
[  143.170922] Bluetooth: L2CAP ver 2.8
[  143.170926] Bluetooth: L2CAP socket layer initialized
[  143.188364] Bluetooth: RFCOMM socket layer initialized
[  143.188563] Bluetooth: RFCOMM TTY layer initialized
[  143.188566] Bluetooth: RFCOMM ver 1.8
[  144.905380] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  146.354673] NET: Registered protocol family 17
[  149.563896] NET: Registered protocol family 10
[  149.564148] lo: Disabled Privacy Extensions
[  155.025484] eth0: no IPv6 routers present
[  160.309968] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  172.711808] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  190.688188] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  203.090914] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  214.988046] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  228.012546] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  241.795514] usb 2-10: new full speed USB device using ohci_hcd and address 3
[  241.917202] usb 2-10: configuration #1 chosen from 1 choice
[  241.961201] Bluetooth: HCI USB driver ver 2.9
[  241.964423] usbcore: registered new interface driver hci_usb
[  303.962808] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  365.526206] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  427.089765] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[  491.070208] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.

`uname -a` gives:

Linux ubuntu 2.6.22-14-generic #1 SMP Sun Oct 14 21:45:15 GMT 2007 x86_64 GNU/Linux

By JesseLukeWalker 19:16, 30 March 2008 (CEST)