User:Sandybutt

Step-by-step instruction to get a Terratec Cinergy T USB XE Rev 2 (Device ID: 0ccd:0069) to work. Worked on my Ubuntu Hardy Heron:

issue the following commands: cd /tmp wget ftp://ftp.terratec.net/Receiver/Cinergy_T_USB_XE/Update/Cinergy_T_USB_XE_MKII_Drv_Linux.zip unzip Cinergy_T_USB_XE_MKII_Drv_Linux.zip mv Cinergy\ T\ USB\ XE\ MKII/Fedora\ Core\ Release\ 6 dvb_cinergy cd dvb_cinergy/ cp /usr/src/linux-source-2.6.24/drivers/media/dvb/dvb-core/*.c . cp /usr/src/linux-source-2.6.24/drivers/media/dvb/dvb-core/*.h . cp /usr/src/linux-source-2.6.24/drivers/media/dvb/dvb-usb/*.c . cp /usr/src/linux-source-2.6.24/drivers/media/dvb/dvb-usb/*.h .

Create a file "af_patch" in the dvb_cinergy folder and insert the following lines: --- bak/af901x-core.c 2008-06-20 15:12:37.000000000 +0200 +++ af901x-core.c 2008-06-20 15:12:52.000000000 +0200 @@ -63,9 +63,6 @@

}

static struct usb_driver af901x_driver = {

-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) - .owner = THIS_MODULE, -#endif

	.name       = "dvb_usb_af901x",
	.probe      = af901x_probe,
	.disconnect = dvb_usb_device_exit,

issue the following commands: patch < ./af_patch make && sudo make install