Okay I have upload some stream using : dvbstream -f 641833 -v 600 -a 601 -o > /tmp/broken.ts it is at : http://www.splatnix.net/broken.ts regards Phil On Sat, 2003-06-07 at 11:04, michal wrote: > If you have no uncorrected blocks, then problem isn't in aerial. Your > transport stream from dvr device should be without errors... What's > exactly your problem? Could you record a piece of TS and make it > downable at some URL? > > --[ UxBoD ]-- wrote: > > Struggling now what else to do :( Would be nice if I could find out > > whether a external aerial would get rid of the problem without spending > > any more money :) > > > > On Sat, 2003-06-07 at 10:46, michal wrote: > > > >>Seems to be good. BER for dvbtune is the same as UNC for tzap (szap/czap). > >> > >> > >>--[ UxBoD ]-- wrote: > >> > >>>root@slider dvbtune # ./dvbtune -f 641833 > >>>Using DVB card "Grundig 29504-401" > >>>tuning DVB-T (in United Kingdom) to 641833000 Hz > >>>polling.... > >>>Getting frontend event > >>>FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI > >>>FE_HAS_SYNC > >>>Event: Frequency: 641833000 > >>> SymbolRate: 0 > >>> FEC_inner: 2 > >>>Bit error rate: 1931 > >>>Signal strength: 12593 > >>>SNR: 51400 > >>>FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI > >>>FE_HAS_SYNC > >>>root@slider dvbtune # > >>>root@slider dvbtune # ./dvbtune -f 641833 -m > >>>Signal=12593, Verror=1768, SNR=51657dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1980, SNR=51400dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1939, SNR=51657dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=2047, SNR=52171dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=2137, SNR=51914dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1964, SNR=51400dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1795, SNR=51143dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1918, SNR=52171dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1974, SNR=52685dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1956, SNR=51400dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1977, SNR=50372dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1985, SNR=51400dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1742, SNR=52685dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1808, SNR=52428dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=2140, SNR=51143dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1928, SNR=51400dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=1985, SNR=51914dB, BlockErrors=0, (S|L|C|V|SY|) > >>>Signal=12593, Verror=2317, SNR=52171dB, BlockErrors=0, (S|L|C|V|SY|) > >>> > >>>It would seem so ? > >>> > >>> > >>> > >>>On Sat, 2003-06-07 at 10:23, michal wrote: > >>> > >>> > >>>>--[ UxBoD ]-- wrote: > >>>> > >>>> > >>>>>Yeah I currently use Xine for playback of DVDs. I have a P4 2.53Ghz with > >>>>>1024Mb RAM. I have thought about getting a Hauppauge WinTV PVR 250 today > >>>>>and use that as the MPEG decoder. What I would like to be able to > >>>>>achieve is to watch DVD, DVB and record DVB. My BER is constantly < 2000 > >>>>>which seems good (thanks for Gavin for his help). My current GC is a > >>>>>Nvidia Geoforce 4 Ti4600 so that has lots of grunt (6000FPS in Glxgears) > >>>>>so I cannot see what the problem is. > >>>> > >>>>Are you really sure, that you have good signal and your DVB card gives > >>>>uncorrupted MPEG stream to you? -- // --[ UxBoD ]-- // 2.4.20-gentoo-r5 // Pentium(R) 4 CPU 2.53GHz // // gpg --keyserver wwwkeys.pgp.net --recv-keys 56ED1CB5 //
Attachment:
signature.asc
Description: This is a digitally signed message part