[linux-dvb] Re: Howto setup a multicast network connection?

[Holger Kiehl <Holger.Kiehl@dwd.de>]

On Mon, 23 Jun 2003, Holger Waechtler wrote:

> Holger Kiehl wrote:
> > 
> > It's now hardcoded, but szap does not get a lock and kdvb is eating a lot
> > of cpu time. Between, i2c->xfer() returns a -121.
> 
> well, if the probing code assumed a BSRU6 it might be that the PLL in 
> your tuner has i2c adress 0x60. In this case you have to write the PLL 
> byte string to i2c adress 0x60 instead of 0x61 like it's done in case of 
> a BSRU6 (but with the content for the SU1278SH). Have you opened your 
> tuner module and checked what PLL is actually used? Is the tuner module 
> a SU1278SH or a plain SU1278? In the latter case you'll maybe have to 
> use the path for the tua6100, don't know...
> 
> please check what module is exactly soldered on your board and which 
> chips are inside. And try if you can talk to the PLL through i2c adress 
> 0x60 or 0x61.
> 
On the box there is a sticker with the following:

    SU1278/SH
    3112 297 12871
    207 KR01

Opening the box there are three chips, I don't know which is the PLL
so I list them all:

Chip1: (assume that this is the tuner)
    STV0299B
    TA113004
    T221F0122

Chip2:
    TDA8060TS
    MK0027H04
    MPJ0122 2

Chip3
    A5059
    29346
    J0492

Both chip 1+2 have a philips logo on them.

Holger (Kiehl)



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.