Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linux-dvb] Re: Reception performance with Avermedia DVB-T
Hi Martin,
Martin Stubbs wrote:
Attached is a patch that I hope is in the corect format for you to process. I
have added code from the tda1004 driver to read the file and that is about
all the changes. The comments at the top of the file explain how to find the
firmware.
Your patch did not applied for me, there have been too many conflicts.
Can you please generate it using
$ cvs -q diff -pu
again? btw: your code looks good but the Kconfig file should contain the
comment how to extract the firmware, too. The TDA10046 entry is a good
example.
Many thanks,
Holger
------------------------------------------------------------------------
--- sp887x.c.keep 2003-11-17 22:22:13.000000000 +0000
+++ sp887x.c 2003-11-18 21:49:05.000000000 +0000
@@ -1,12 +1,39 @@
+/*
+ Driver for the Microtune 7202D Frontend
+*/
+
+/*
+ This driver needs a copy of the Avermedia firmware. The version tested
+ is part of the Avermedia DVB-T 1.3.26.3 Application. If the software is
+ installed in Windows the file will be in the /Program Files/AVerTV DVB-T/
+ directory and is called sc_main.mc. Alternatively it can "extracted" from
+ the install cab files. Copy this file to /etc/dvb/sc_main.mc.
+ With this version of the file the first 10 bytes are discarded and the
+ next 0x4000 loaded. This may change in future versions.
+ */
+#define __KERNEL_SYSCALLS__
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/unistd.h>
+#include <linux/fcntl.h>
+#include <linux/errno.h>
#include <linux/i2c.h>
+
#include "dvb_frontend.h"
#include "dvb_functions.h"
+#ifndef DVB_SP887X_FIRMWARE_FILE
+#define DVB_SP887X_FIRMWARE_FILE "/etc/dvb/sc_main.mc"
+#endif
+static char *sp887x_firmware = DVB_SP887X_FIRMWARE_FILE;
#if 0
#define dprintk(x...) printk(x)
@@ -40,7 +67,7 @@
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_RECOVER
};
-
+static int errno;
static
int i2c_writebytes (struct dvb_frontend *fe, u8 addr, u8 *buf, u8 len)
@@ -76,7 +103,7 @@
/**
* in case of soft reset we ignore ACK errors...
*/
- if (!(reg == 0xf1a && data == 0x000 &&
+ if (!(reg == 0xf1a && data == 0x000 &&
(ret == -EREMOTEIO || ret == -EFAULT)))
{
printk("%s: writereg error "
@@ -113,8 +140,9 @@
static
void sp887x_microcontroller_stop (struct dvb_frontend *fe)
{
+ dprintk("%s\n", __FUNCTION__);
sp887x_writereg(fe, 0xf08, 0x000);
- sp887x_writereg(fe, 0xf09, 0x000);
+ sp887x_writereg(fe, 0xf09, 0x000);
/* microcontroller STOP */
sp887x_writereg(fe, 0xf00, 0x000);
@@ -124,8 +152,9 @@
static
void sp887x_microcontroller_start (struct dvb_frontend *fe)
{
+ dprintk("%s\n", __FUNCTION__);
sp887x_writereg(fe, 0xf08, 0x000);
- sp887x_writereg(fe, 0xf09, 0x000);
+ sp887x_writereg(fe, 0xf09, 0x000);
/* microcontroller START */
sp887x_writereg(fe, 0xf00, 0x001);
@@ -136,6 +165,7 @@
void sp887x_setup_agc (struct dvb_frontend *fe)
{
/* setup AGC parameters */
+ dprintk("%s\n", __FUNCTION__);
sp887x_writereg(fe, 0x33c, 0x054);
sp887x_writereg(fe, 0x33b, 0x04c);
sp887x_writereg(fe, 0x328, 0x000);
@@ -153,8 +183,6 @@
}
-#include "sp887x_firm.h"
-
#define BLOCKSIZE 30
/**
@@ -163,14 +191,62 @@
static
int sp887x_initial_setup (struct dvb_frontend *fe)
{
- u8 buf [BLOCKSIZE];
+ u8 buf [BLOCKSIZE+2];
+ unsigned char *firmware = NULL;
int i;
+ int fd;
+ int filesize;
+ int fw_size;
+
+ dprintk("%s\n", __FUNCTION__);
/* soft reset */
sp887x_writereg(fe, 0xf1a, 0x000);
sp887x_microcontroller_stop (fe);
+ mm_segment_t fs = get_fs();
+
+ // Load the firmware
+ set_fs(get_ds());
+ fd = open(sp887x_firmware, 0, 0);
+ if (fd < 0) {
+ printk(KERN_WARNING "%s: Unable to open firmware %s\n", __FUNCTION__,
+ sp887x_firmware);
+ return -EIO;
+ }
+ filesize = lseek(fd, 0L, 2);
+ if (filesize <= 0) {
+ printk(KERN_WARNING "%s: Firmware %s is empty\n", __FUNCTION__,
+ sp887x_firmware);
+ sys_close(fd);
+ return -EIO;
+ }
+
+ fw_size = 0x4000;
+
+ // allocate buffer for it
+ firmware = vmalloc(fw_size);
+ if (firmware == NULL) {
+ printk(KERN_WARNING "%s: Out of memory loading firmware\n",
+ __FUNCTION__);
+ sys_close(fd);
+ return -EIO;
+ }
+
+ // read it!
+ // read the first 16384 bytes from the file
+ // ignore the first 10 bytes
+ lseek(fd, 10, 0);
+ if (read(fd, firmware, fw_size) != fw_size) {
+ printk(KERN_WARNING "%s: Failed to read firmware\n", __FUNCTION__);
+ vfree(firmware);
+ sys_close(fd);
+ return -EIO;
+ }
+ sys_close(fd);
+ set_fs(fs);
+
printk ("%s: firmware upload... ", __FUNCTION__);
/* setup write pointer to -1 (end of memory) */
@@ -180,12 +256,12 @@
/* dummy write (wrap around to start of memory) */
sp887x_writereg(fe, 0x8f0a, 0x0000);
- for (i=0; i<sizeof(sp887x_firm); i+=BLOCKSIZE) {
+ for (i=0; i<fw_size; i+=BLOCKSIZE) {
int c = BLOCKSIZE;
int err;
- if (i+c > sizeof(sp887x_firm))
- c = sizeof(sp887x_firm) - i;
+ if (i+c > fw_size)
+ c = fw_size - i;
/* bit 0x8000 in address is set to enable 13bit mode */
/* bit 0x4000 enables multibyte read/write transfers */
@@ -193,15 +269,18 @@
buf[0] = 0xcf;
buf[1] = 0x0a;
- memcpy(&buf[2], &sp887x_firm[i], c);
+ memcpy(&buf[2], firmware + i, c);
if ((err = i2c_writebytes (fe, 0x70, buf, c+2)) < 0) {
printk ("failed.\n");
printk ("%s: i2c error (err == %i)\n", __FUNCTION__, err);
+ vfree(firmware);
return err;
}
}
+ vfree(firmware);
+
/* don't write RS bytes between packets */
sp887x_writereg(fe, 0xc13, 0x001);
--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.
Home |
Main Index |
Thread Index