Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linux-dvb] Re: TwinHan VisionPlus VP3021 howto?
On Sunday 21 November 2004 07:24, Rainer Zocholl wrote:
> (Andrew de Quincey) 20.11.04 20:23
>
> >On Saturday 20 Nov 2004 19:41, Rainer Zocholl wrote:
> >> Now i tried a "TwinHan VisionDVT Ter" AKA: "VisonPlus VP-3021"
> >> because it's 25 Euro less and has a very nice USB IR sensor.
> >>
> >> But:
> >>
> >> i can't get a video device assigned o it.
> >>
> >> Can someone give ma a hint how to debug it?
> >>
> >>
> >>
> >> Tried with that card insitead of the Avermedia or with
> >> both cards:
> >> The last thing i see is
> >>
> >> mt352_read_register: readreg error (ret == -5)
> >> resp.
> >> mt352_read_register: readreg error (ret == -121)
> >>
> >> What does those codes mean?
> >> A lookin the source was not enlightening ;-)
> >>
> >>
> >> I wonder why "mt352" is used.
> >> If i look into the tuner i find a chip stamped "nxt6000".
> >> Is that the same?
> >> Are there different "Model 3021"?
> >
> >Ah - you're using the pre-refactoring drivers (as you're using 2.4).
>
> What ever "pre-refactoring" means .. ;-)
>
> >You need to load the "nxt6000" module as well as the mt352.
> >
> >The errors you're seeing shouldn't be anything to worry about.
>
> That's good to hear! ;-)
>
>
> But lsmod say nxt6000 is loaded :-(
>
try: modprobe dst
Regards
Mike
> In http://www.vdr-wiki.de/wiki/index.php/DVB-T_Budget-PCI-Karten
> i read:
> VisionPlus bttv i2c_hw=1 card=0x7, Hama, Twinhan-> card=0x68),
>
> But in dmsg is see 113 ?
>
> bttv: Bt8xx card found (1).
> bttv1: Bt878 (rev 17) at 00:0b.0, irq: 5, latency: 64, mmio: 0xcfcfc000
> bttv1: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is
> 1822:0001 bttv1: using: Twinhan DST + clones [card=113,autodetected]
> ~~~~~~~~
> bttv1: gpio: en=00000000, out=00000000 in=00f100fe [init]
> i2c-dev.o: Registered 'bt878 #1 [hw]' as minor 1
> i2c-core.o: adapter bt878 #1 [hw] registered as adapter 1.
> bttv1: using tuner=4
> i2c-core.o: driver i2c TV tuner driver registered.
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> bt878(0): Bt878 (rev 17) at 00:09.1, irq: 5, latency: 64, memory:
> 0xcfcff000 bt878: Bt878 AUDIO function found (1).
> bt878(1): Bt878 (rev 17) at 00:0b.1, irq: 5, latency: 64, memory:
> 0xcfcfd000
>
>
>
>
>
> # lsmod
> Module Size Used by Not tainted
> lirc_serial 7744 1 (autoclean)
> lirc_dev 8544 1 (autoclean) [lirc_serial]
> nxt6000 6368 0
> sp887x 4548 0 (unused)
> dvb-bt8xx 3916 0 (unused)
> bt878 4992 0 [dvb-bt8xx]
> tuner 11780 0 (autoclean) (unused)
> bttv 107712 0 [dvb-bt8xx bt878]
> btcx-risc 1960 0 [bttv]
> ttusb_dec 14368 0 (unused)
> dvb-ttusb-budget 21204 0 (unused)
> dvb-ttpci-budget 5120 0 (unused)
> dvb-ttpci 281568 8
> ttpci-eeprom 1296 0 [dvb-ttpci-budget dvb-ttpci]
> saa7146_vv 32536 0 [dvb-ttpci]
> saa7146 10044 0 [dvb-ttpci-budget dvb-ttpci saa7146_vv]
> mt352 3296 0 (unused)
> mt312 4544 0
> cx24110 5216 0
> grundig_29504-491 3200 0
> grundig_29504-401 3872 0
> tda1004x 10148 0
> ves1820 4452 0
> stv0299 8576 0 (unused)
> alps_tdmb7 3360 0
> alps_tdlb7 5028 0
> ves1x93 4324 0
> dvb-core 35876 44 [nxt6000 sp887x dvb-bt8xx ttusb_dec
> dvb-ttusb-budget dvb-ttpci-budget dvb-ttpci mt352 mt312 cx24110
> grundig_29504-491 grundig_29504-401 tda1004x ves1820 stv0299 alps_tdmb7
> alps_tdlb7 ves1x93]
> video-buf 10128 0 [bttv saa7146_vv]
> v4l2-common 2944 0 [bttv saa7146_vv]
> v4l1-compat 12232 0 [saa7146_vv]
> evdev 4160 0 (unused)
> ipt_limit 960 12 (autoclean)
> ipt_state 608 14 (autoclean)
> ipt_REJECT 3040 17 (autoclean)
> ipt_LOG 3232 12
> ip_conntrack_ftp 4000 0 (unused)
> iptable_mangle 2208 0 (autoclean) (unused)
> iptable_nat 22004 0 (autoclean) (unused)
> ip_conntrack 27636 1 (autoclean) [ipt_state ip_conntrack_ftp
> iptable_nat]
> iptable_filter 1760 1 (autoclean)
> ip_tables 13536 9 [ipt_limit ipt_state ipt_REJECT ipt_LOG
> iptable_mangle iptable_nat iptable_filter]
> mousedev 3808 0 (unused)
> keybdev 1824 0 (unused)
> cramfs 37024 0 (unused)
> i2o_config 7048 0 (unused)
> i2o_block 50496 0 (unused)
> i2o_core 32480 0 [i2o_config i2o_block]
>
> Rainer
Home |
Main Index |
Thread Index