[linux-dvb] Re: TwinHan VisionPlus VP3021 howto?

[Rainer Zocholl <UseNet-Posting-Nospam-74308-@zocki.toppoint.de>]

mike@secnet.net.au(Mike Lampard)  21.11.04 18:30


>On Sunday 21 November 2004 07:24, Rainer Zocholl wrote:
>> (Andrew de Quincey)  20.11.04 20:23
>>
>>>On Saturday 20 Nov 2004 19:41, Rainer Zocholl wrote:
>>>> Now i tried a "TwinHan VisionDVT Ter" AKA: "VisonPlus VP-3021"
>>>> because it's 25 Euro less and has a very nice USB IR sensor.
>>>>
>>>> But:
>>>>
>>>> i can't get a video device assigned o it.
>>>>
>>>> Can someone give ma a hint how to debug it?
>>>>
>>>>
>>>>
>>>> Tried with that card insitead of the Avermedia or with
>>>> both cards:
>>>> The last thing i see is
>>>>
>>>> mt352_read_register: readreg error (ret == -5)
>>>> resp.
>>>> mt352_read_register: readreg error (ret == -121)
>>>>
>>>> What does those codes mean?
>>>> A lookin the source was not enlightening ;-)
>>>>
>>>>
>>>> I wonder why "mt352" is used.
>>>> If i look into the tuner i find a chip stamped "nxt6000".
>>>> Is that the same?
>>>> Are there different "Model 3021"?
>>>
>>>Ah - you're using the pre-refactoring drivers (as you're using 2.4).
>>
>> What ever "pre-refactoring" means .. ;-)
>>
>>>You need to load the "nxt6000" module as well as the mt352.
>>>
>>>The errors you're seeing shouldn't be anything to worry about.
>>
>> That's good to hear! ;-)
>>
>>
>> But lsmod say nxt6000 is loaded :-(
>>

>try: modprobe dst

looks much better:


> mmand TEST_UNIT_READY (6 bytes)
315a302,313
> bt878 find by dvb adap: checking "Technotrend/Hauppauge PCI rev2.1"
> bt878 find by dvb adap: NOT found "Technotrend/Hauppauge PCI rev2.1"
> bt878 find by dvb adap: checking "Siemens/Technotrend/Hauppauge PCI rev1.3"
> bt878 find by dvb adap: NOT found "Siemens/Technotrend/Hauppauge PCI
rev1.3"
> bt878 find by dvb adap: checking "TT-Budget/WinTV-NOVA-S  PCI"
> bt878 find by dvb adap: NOT found "TT-Budget/WinTV-NOVA-S  PCI"
> bt878 find by dvb adap: checking "Ave"
> bt878 find by dvb adap: checking "DST"
> dst_check_ci: recognize DTTDIG
> DST type : terrestial TV
> DST type flags :
> DVB: registering frontend 4:0 (DST TERR)...

But no "video device"

Is that OK?  (As it is only a budget card?)


How can i test that is is really running?



msi:~/video# cat /dev/video3
cat: /dev/video3: No such device

Rainer---<=====>                         Vertraulich
             //
           //                              
         <=====>--------------ocholl, Kiel, Germany ------------