[linux-dvb] Re: cinergyT2: which kernel/usb module to use?

[Stefan Lucke <stefan@lucke.in-berlin.de>]

On Freitag, 26. November 2004 18:26, Holger Waechtler wrote:

> it's technically possible but currently not supported, all recent PCs 
> and MACs that are capable of running a software decoder usually have a 
> USB2.0 port, so this was not high priority to us.

recent PCs is a vague term. 

> (maybe we deliver a software-update one day when we have the time and 
> mood to care about this - ;)
> (in any case you can use it as luxury IR remote control receiver for 
> your VDR box... - ;)
> have fun,

:-(( .

Yes IR works. Key repeat rate is much to high. Pressing "1" and to "2" is
written multiple times upon a short hit.

11Nov 27 00:07:39 jarada kernel: got key (type 1, value 0xfd02eb04
Nov 27 00:07:40 jarada kernel: got key (type 1, value 0xffffffff
22Nov 27 00:07:45 jarada kernel: got key (type 1, value 0xfc03eb04
Nov 27 00:07:45 jarada kernel: got key (type 1, value 0xffffffff


With vdr and an USB2.0 pci-controller I had two hard crashes.
caps lock and scroll lock led flashing.

with dvbscan I get:
stefan@jarada:/usr/src/DVB/dvb-apps/util/scan> ./dvbscan -x 0 -t 1 -u -n dvb-t/de-Berlin
scanning dvb-t/de-Berlin
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 522000000 0 2 9 1 1 2 0
initial transponder 570000000 0 2 9 1 1 2 0
initial transponder 658000000 0 2 9 1 1 2 0
>>> tune to: 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 658000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 658000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.


from syslog:
Nov 27 00:13:23 jarada kernel: got key (type 16, value 0x080007f7
Nov 27 00:13:23 jarada kernel: got key (type -119, value 0xbdd40020
Nov 27 00:13:23 jarada kernel: got key (type -91, value 0x00000000
Nov 27 00:13:23 jarada kernel: got key (type 0, value 0x00000000
Nov 27 00:13:23 jarada kernel: got key (type 0, value 0x00ff0000
Nov 27 00:13:24 jarada kernel: got key (type 16, value 0x080007f7
Nov 27 00:13:24 jarada kernel: got key (type -119, value 0xfdd40020
Nov 27 00:13:24 jarada kernel: got key (type -92, value 0x00000000
Nov 27 00:13:24 jarada kernel: got key (type 0, value 0x00000000
Nov 27 00:13:24 jarada kernel: got key (type 0, value 0x00ff0000
Nov 27 00:13:24 jarada kernel: got key (type 16, value 0x080007f7
Nov 27 00:13:24 jarada kernel: got key (type -119, value 0x9dd40020

-- 
stefan lucke