[vdr] Re: PCI Latecy and OSD? (pixelization SOLVED)

[alexw <alexw@undercover.mine.nu>]

I've got a solution to avoid the nasty sqares ;-)

You need to create a strap between pin 4 and 13 of the BSRV2-301a. tuner 
(check the picture). Then you need to remove the capa and that's it. 
I've got a constant lock and a normal snr with a zero ber.


Ragnar Sundblad wrote:

>
>
> --On den 28 januari 2003 20:22 +0100 alexw <alexw@undercover.mine.nu> 
> wrote:
>
>> My +5V is only at 4.811V and my +3.3V monitored value is 3.232.
>> I did not
>> take power measurement directly on the motherboard, but I think that the
>> values returned by the system hardware monitor are reliable enough. The
>> +12V is really stable between 12~12.123V, never lower.
>
>
> Maybe you have spikes or other instabilities that are to fast
> to show up on your monitor? That seems to be one of the
> problems in my case.
>
>> Using a strong power supply does not show any improvement on
>> the frontend.
>
>
> Strong in the specs is good, but how does it behave in reality?
> And what comes out on the PCI connector?
>
> I'd check it out with a scope or at least a volt meter, don't
> forget to make AC measurements too.
>
> /ragge
>
>
>
>



-- Binary/unsupported file stripped by Listar --
-- Type: image/jpeg
-- File: alex.jpg



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.