[vdr] Re: issues with receiver thread

[Stefaan Coddé <stefaan.codde@pandora.be>]

Klaus Schmidinger wrote :

>When a recording starts, the currently viewed channel is put into
Transfer Mode
>if this is the same one as the recorded channel.
>The reason for this is that the user shall be able to switch to
different live
>channels on the same transponder while the recording is going on.
>When the recording finishes, there is no action taken to put the live
channel back
>into "non Transfer Mode", since this would cause a short glitch in the
live
>programme, which might annoy the users.
>You can easily turn Transfer Mode off by just doing a channel switch.
>Maybe VDR should attempt to put the live channel back into "non
Transfer Mode" 
>after a recording ends (and there is no other recording going on). 
>but, as I said, this will cause a short glitch in the live channel...

There's still the power consumption issue so some will rather accept the
small glitch.
Why not add it as a user adjustable setting in the config menu structure
of VDR?




-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.