[vdr] Re: DXR3 only black and white output

["Huber, Matthias S-RD-CP1" <Matthias.Huber@heidelberg.com>]

Hi,
I think, Frank is right. The adaptor SVHS->cinch (original from Creative?) should work in any case (unless it's a faulty cable...)! So I would recommend fiddling with the parameters, too.
Good luck,
Matthias

> -----Ursprüngliche Nachricht-----
> Von: Frank Scherthan [mailto:Frank.Scherthan@t-online.de]
> Gesendet: Dienstag, 16. September 2003 12:00
> An: vdr@linuxtv.org
> Betreff: [vdr] Re: DXR3 only black and white output
> 
> 
> Christian Kramer wrote:
> > I think this is my problem. I use an adapter for the 
> out-connector of
> > the DXR3. It's SVHS -> cinch. But I wonder why everything 
> worked fine
> > with Windows and the same setup.
> > 
> > I'll buy an SVHS cable this evening and will do some tests 
> with my video
> > projector. I hope a cheap cable from Conrad will do the 
> job. The only
> > problem that seems to appear now is, that I need cinch 
> connetins because
> > of the A/V-Reciever and TV-Set I use. They can't handle 
> SVHS as I know
> > so far.
> Wait! Don't go buying a new cable, if you haven't tried all different 
> combinations of parameter while insmoding the driver! Pleas look into 
> the file ldm and the Readme in the directory of "modules". There are 
> alot of examples how to load the drivers with different parameters...
> 
> > 
> > Is it possible to convert the SVHS signal to a proper, I think, FBAS
> > signal over cinch?
> This is what I did :) I solderd the adapter myself and it works very 
> nice! I used the following URI:
> http://www.hut.fi/Misc/Electronics/circuits/svideo2cvideo.html
> 
> Frank
> 
> 
> 
> -- 
> Info:
> To unsubscribe send a mail to ecartis@linuxtv.org with 
> "unsubscribe vdr" as subject.
> 
> 


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.