User talk:Heiner

default behavior:

[  203.993000] Linux video capture interface: v1.00
[  204.071000] em28xx v4l2 driver version 0.0.1 loaded
[  204.072000] usbcore: registered new driver em28xx
[  216.847000] usb 5-1.2: new high speed USB device using ehci_hcd and address 4
[  216.941000] usb 5-1.2: configuration #1 chosen from 1 choice
[  216.941000] em28xx new video device (0ccd:0042): interface 0, class 255
[  216.941000] em28xx #0: Alternate settings: 8
[  216.941000] em28xx #0: Alternate setting 0, max size= 0
[  216.941000] em28xx #0: Alternate setting 1, max size= 0
[  216.941000] em28xx #0: Alternate setting 2, max size= 1448
[  216.941000] em28xx #0: Alternate setting 3, max size= 2048
[  216.941000] em28xx #0: Alternate setting 4, max size= 2304
[  216.941000] em28xx #0: Alternate setting 5, max size= 2580
[  216.941000] em28xx #0: Alternate setting 6, max size= 2892
[  216.941000] em28xx #0: Alternate setting 7, max size= 3072
[  217.227000] input: em2880/em2870 remote control as /class/input/input4
[  217.227000] em28xx-input.c: remote control handler attached
[  217.478000] attach_inform: eeprom detected.
[  217.481000] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[  217.481000] attach inform: detected I2C address c2
[  217.481000] Loading base firmware: xc3028_init0.i2c.fw
[  223.914000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
[  224.140000] attach_inform: tvp5150 detected.
[  224.173000] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
[  224.173000] em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
[  224.173000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
[  224.173000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[  224.173000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  224.173000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  224.173000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
[  224.173000] em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
[  224.173000] em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
[  224.173000] em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
[  224.173000] em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
[  224.173000] em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
[  224.173000] em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
[  224.173000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  224.173000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  224.173000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  224.173000] EEPROM ID= 0x9567eb1a
[  224.173000] Vendor/Product ID= 0ccd:0042
[  224.173000] AC97 audio (5 sample rates)
[  224.173000] 500mA max power
[  224.173000] Table at 0x06, strings=0x326a, 0x349c, 0x0000
[  224.241000] tvp5150 0-005c: tvp5150am1 detected.
[  226.318000] em28xx-video.c: requesting em2880-dvb!
[  226.463000] /usr/src/v4l-dvb/v4l/mt2060-tuner.c: mt2060_module_init
[  226.636000] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[  226.654000] em28xx #0: V4L2 device registered as /dev/video0
[  226.654000] em2880-dvb.c: DVB Init
[  226.660000] em2880-dvb.c: VIDIOC_S_MODE
[  226.660000] Loading base firmware: xc3028_8MHz_init0.i2c.fw
[  233.104000] Loading specific dtv settings: xc3028_DTV8_2620.i2c.fw
[  233.240000] xc3028-tuner.c: sending extra call for DVB-T
[  233.347000] zl10353: device found!
[  233.347000] /usr/src/v4l-dvb/v4l/em2880-dvb.c: em2880_zl10353_init
[  233.437000] DVB: registering new adapter (em2880 DVB-T).
[  233.437000] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
[  233.437000] em28xx #0: Found Terratec Hybrid XS
[  233.437000] em28xx audio device (0ccd:0042): interface 1, class 1
[  233.437000] em28xx audio device (0ccd:0042): interface 2, class 1
[  233.680000] usbcore: registered new driver snd-usb-audio
[  403.647000] em28xx-video.c: Switching device from DVB-T to analogue mode
[  403.647000] Loading base firmware: xc3028_init0.i2c.fw
[  410.083000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
[  410.461000] tvp5150 0-005c: tvp5150am1 detected.
[  412.797000] Loading specific configuration for requested mode xc3028_BG_PAL_A2_A.i2c.fw

with modprobe em28xx card=10:

[  167.669000] Linux video capture interface: v1.00
[  168.060000] em28xx v4l2 driver version 0.0.1 loaded
[  168.060000] usbcore: registered new driver em28xx
[  190.043000] usb 1-1.2: new high speed USB device using ehci_hcd and address 4
[  190.137000] usb 1-1.2: configuration #1 chosen from 1 choice
[  190.137000] em28xx new video device (0ccd:0042): interface 0, class 255
[  190.137000] em28xx #0: Alternate settings: 8
[  190.137000] em28xx #0: Alternate setting 0, max size= 0
[  190.137000] em28xx #0: Alternate setting 1, max size= 0
[  190.137000] em28xx #0: Alternate setting 2, max size= 1448
[  190.137000] em28xx #0: Alternate setting 3, max size= 2048
[  190.137000] em28xx #0: Alternate setting 4, max size= 2304
[  190.137000] em28xx #0: Alternate setting 5, max size= 2580
[  190.137000] em28xx #0: Alternate setting 6, max size= 2892
[  190.137000] em28xx #0: Alternate setting 7, max size= 3072
[  190.775000] attach_inform: eeprom detected.
[  190.778000] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[  190.778000] attach inform: detected I2C address c2
[  190.778000] Loading base firmware: xc3028_init0.i2c.fw
[  197.212000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
[  197.416000] attach_inform: tvp5150 detected.
[  197.449000] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
[  197.449000] em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
[  197.449000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
[  197.449000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[  197.449000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  197.449000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  197.449000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
[  197.449000] em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
[  197.449000] em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
[  197.449000] em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
[  197.449000] em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
[  197.449000] em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
[  197.449000] em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
[  197.449000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  197.449000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  197.449000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  197.449000] EEPROM ID= 0x9567eb1a
[  197.449000] Vendor/Product ID= 0ccd:0042
[  197.449000] AC97 audio (5 sample rates)
[  197.449000] 500mA max power
[  197.449000] Table at 0x06, strings=0x326a, 0x349c, 0x0000
[  197.517000] tvp5150 0-005c: tvp5150am1 detected.
[  199.594000] em28xx-video.c: requesting em2880-dvb!
[  199.753000] /usr/src/v4l-dvb/v4l/mt2060-tuner.c: mt2060_module_init
[  199.927000] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[  199.945000] em28xx #0: V4L2 device registered as /dev/video0
[  199.945000] em2880-dvb.c: DVB Init
[  199.951000] em2880-dvb.c: VIDIOC_S_MODE
[  199.951000] Loading base firmware: xc3028_8MHz_init0.i2c.fw
[  206.391000] Loading specific dtv settings: xc3028_DTV8_2620.i2c.fw
[  206.527000] xc3028-tuner.c: sending extra call for DVB-T
[  206.634000] zl10353: device found!
[  206.634000] /usr/src/v4l-dvb/v4l/em2880-dvb.c: em2880_zl10353_init
[  206.724000] DVB: registering new adapter (em2880 DVB-T).
[  206.724000] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
[  206.724000] em28xx #0: Found Hauppauge WinTV HVR 900
[  206.724000] em28xx audio device (0ccd:0042): interface 1, class 1
[  206.724000] em28xx audio device (0ccd:0042): interface 2, class 1
[  206.989000] usbcore: registered new driver snd-usb-audio
[  255.696000] em28xx-video.c: Switching device from DVB-T to analogue mode
[  255.696000] Loading base firmware: xc3028_init0.i2c.fw
[  262.137000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
[  262.514000] tvp5150 0-005c: tvp5150am1 detected.
[  264.850000] Loading specific configuration for requested mode xc3028_BG_PAL_A2_A.i2c.fw

and after modprobe em28xx card=34:

[  142.567000] Linux video capture interface: v1.00
[  142.778000] em28xx v4l2 driver version 0.0.1 loaded
[  142.778000] usbcore: registered new driver em28xx
[  156.885000] usb 4-1.2: new high speed USB device using ehci_hcd and address 4
[  156.979000] usb 4-1.2: configuration #1 chosen from 1 choice
[  156.979000] em28xx new video device (0ccd:0042): interface 0, class 255
[  156.979000] em28xx #0: Alternate settings: 8
[  156.979000] em28xx #0: Alternate setting 0, max size= 0
[  156.979000] em28xx #0: Alternate setting 1, max size= 0
[  156.979000] em28xx #0: Alternate setting 2, max size= 1448
[  156.979000] em28xx #0: Alternate setting 3, max size= 2048
[  156.979000] em28xx #0: Alternate setting 4, max size= 2304
[  156.979000] em28xx #0: Alternate setting 5, max size= 2580
[  156.979000] em28xx #0: Alternate setting 6, max size= 2892
[  156.979000] em28xx #0: Alternate setting 7, max size= 3072
[  157.473000] attach_inform: eeprom detected.
[  157.476000] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[  157.476000] attach inform: detected I2C address c2
[  157.476000] Loading base firmware: xc3028_init0.i2c.fw
[  163.904000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
[  164.103000] attach_inform: tvp5150 detected.
[  164.136000] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
[  164.136000] em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
[  164.136000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
[  164.136000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[  164.136000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  164.136000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  164.136000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
[  164.136000] em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
[  164.136000] em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
[  164.136000] em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
[  164.136000] em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
[  164.136000] em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
[  164.136000] em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
[  164.136000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  164.136000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  164.136000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  164.136000] EEPROM ID= 0x9567eb1a
[  164.136000] Vendor/Product ID= 0ccd:0042
[  164.136000] AC97 audio (5 sample rates)
[  164.136000] 500mA max power
[  164.136000] Table at 0x06, strings=0x326a, 0x349c, 0x0000
[  164.204000] tvp5150 0-005c: tvp5150am1 detected.
[  166.281000] em28xx-video.c: requesting em28xx-audio!
[  166.403000] /usr/src/v4l-dvb/v4l/mt2060-tuner.c: mt2060_module_init
[  166.439000] em28xx-video.c: requesting em2880-dvb!
[  166.652000] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[  166.670000] em28xx #0: V4L2 device registered as /dev/video0
[  166.670000] em28xx-audio.c: probing for em28x1 non standard usbaudio
[  166.670000] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[  166.670000] em2880-dvb.c: DVB Init
[  166.676000] em2880-dvb.c: VIDIOC_S_MODE
[  166.676000] Loading base firmware: xc3028_8MHz_init0.i2c.fw
[  173.130000] Loading specific dtv settings: xc3028_DTV8_2620.i2c.fw
[  173.863000] xc3028-tuner.c: sending extra call for DVB-T
[  173.964000] drx3975d: device found!
[  173.964000] -- initial drx... init --
[  173.964000] DVB: registering new adapter (em2880 DVB-T).
[  173.964000] DVB: registering frontend 0 (Micronas drx3975d DVB-T)...
[  173.964000] em28xx #0: Found Hauppauge WinTV HVR Rev. 1.2
[  173.964000] em28xx audio device (0ccd:0042): interface 1, class 1
[  173.964000] em28xx audio device (0ccd:0042): interface 2, class 1
[  174.130000] usbcore: registered new driver snd-usb-audio
[  229.005000] em28xx-video.c: Switching device from DVB-T to analogue mode
[  229.005000] Loading base firmware: xc3028_init0.i2c.fw
[  235.451000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
[  235.828000] tvp5150 0-005c: tvp5150am1 detected.
[  238.164000] Loading specific configuration for requested mode xc3028_BG_PAL_A2_A.i2c.fw