[linux-dvb] Re: TT DVB-T not working

[Nils Ohlmeier <nils.ohlmeier@web.de>]

Hi Holger,

i opened the tuner and it contains a chip label SP5659. As a proof ;) some 
quick shots with my webcam are stored at http://www.ohlmeier.de/TT-DVB/

If a can do anything to get this runing, please let know.

Thanks and greetings
  Nils

On Wednesday 20 November 2002 13:28, Holger Waechtler wrote:
> Hi Nils,
>
> please takle a look into your tuner module (the silver metal box) and
> tell me the name of the little chip inside. Juergens driver should work
> fine if there is a SP5659, but will fail if you find a SP5668. The
> latter is not connected via i2c but a serial interface, it needs t obe
> handled differently.
>
> Holger
>
> Nils Ohlmeier wrote:
> > Hi,
> >
> > On Tuesday 19 November 2002 19:52, Jürgen Peitz wrote:
> >>Am Dienstag, 19. November 2002 14:34 schrieb Holger Waechtler:
> >>>Juri Haberland wrote:
> >>>>Nils Ohlmeier wrote:
> >>>>>From the logs i would say the driver is not loaded correct or even
> >>>>>
> >>>>>does not
> >>>>>support my card. But i'm a newbie to this stuff and may be wrong,
> >>>>>That's why
> >>>>>i'm asking for help with my logs here.
> >>>>
> >>>>I think the driver is actually working and it seems that you have the
> >>>>same revision as I have (1.2). You also seem to have copied the
> >>>>Sc_main.mc file from the Windows driver to the appropiate directory.
> >>>>
> >>>>Please try to unload/load the driver one or two times and try to tune
> >>>>with 'tzap ZDF'.
> >>>
> >>>please update your driver source before - yesterday I introduced a bug
> >>>which might had caused your problems. should be fixed again.
> >>
> >>because of some changes in dvb_frontend.c the tdlb7 driver works better
> >>with this patch.
> >>
> >>Holger, can you please add this also to CVS.
> >
> > i did made a 'cvs update' a few minutes ago and applied Jürgens patch.
> > Then i insmoded the driver and tryed 'tzap ZDF'. No luck.
> > But Juri is right with his advice to load and unload the driver a few
> > times. This leads sometimes to the result that the tzap output changes
> > from the all zero line to 'status 17' and 'FE_HAS_LOCK' at the end of the
> > line. But nevertheless no picture.
> > Maybe some facts about my system are helpfull:
> > Gentoo Linux 1.4_rc1, kernel 2.4.19-gentoo-r9, gcc 3.2
> > Athlon XP 1900+, Asus A7V8X board with Via KT400 chipset, addtionaly to
> > my TT DVB-T 1.2 card a Hauppauge WinTV card is installed and shares the
> > interrupt with the TT (but i also tried it without the bttv driver
> > loaded).
> >
> > I'm open for any hints. Should i try to remove the WinTV card for
> > example?
> >
> > Thanks and greetings
> >    Nils



--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.