Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linux-dvb] Re: Full featured card summary
Hello Klaus,
Klaus Schmidinger wrote:
>
> Andrew de Quincey wrote:
> >
> > On Saturday 20 March 2004 16:42, Klaus Schmidinger wrote:
> > > Andrew de Quincey wrote:
> > > > > >From the Dpram checksums I can say that the first one is the one from
> > > > >
> > > > > 2003-09-05, and the second one is the one which is in the 2003-11-08
> > > > > driver package in my VDR FTP archive.
> > > >
> > > > So which is the one you tried in the 1.1.0 driver that had the same
> > > > firmware version?
> > > >
> > > > I'm trying to help you: the most likely (to me) is that something about
> > > > the firmware is different, even though the versions are the same. I do
> > > > not have older versions of the firmware.
> > >
> > > The one that's currently on linuxtv.org has version number 0x261b, the
> > > previous one had 0x261a. I have tried both of them, but they behave exactly
> > > the same (meaning DiSEqC doesn't work reliably).
> >
> > Cool. The Root/Dpram in your 2003-11-08 DVB snapshot is the same as the ones I
> > extracted from dvb-ttpci-01.fw.gz currently on the website. So its definitely
> > not that; I just wanted to make ABSOLUTELY sure it wasn't some build issue.
> > I'm assuming your 2003-11-08 snapshot works for your DISEQC BTW.
>
> Yes, it does.
>
> Klaus
FWIW:
I reviewed your e-mails to understand your SAT-hardwaresetup. From your
descriptions I guess you have something like this:
some ASCII art: -----------
|Switch 1 |
|E0 10 38 F0|---ZF 1 (e.g. 19,2E low
vert.)
----------- |E0 10 38 F1|---ZF 2 (e.g. 19,2E high
vert.)
|Relay | |E0 10 38 F2|---ZF 3 (e.g. 19,2E low hor.)
DVB-CARD ----|E0 10 38 F0|---|E0 10 38 F3|---ZF 4 (e.g. 19,2E high
hor.)
| | -----------
| | -----------
|E0 10 38 F1|---|Switch 2 |
----------- |E0 10 38 F0|---ZF 1 (e.g. 21,5E low
vert.)
|E0 10 38 F1|---ZF 2 (e.g. 21,5E high
vert.)
|E0 10 38 F2|---ZF 3 (e.g. 21,5E low hor.)
|E0 10 38 F3|---ZF 4 (e.g. 21,5E high
hor.)
-----------
but then I think your DiSEqC setup is not matching.
For this you need:
S19.2E 11700 V 9750 v [E0 10 38 F0] W100 [E0 10 38 F0]
S19.2E 99999 V 10600 v [E0 10 38 F0] W100 [E0 10 38 F1]
S19.2E 11700 H 9750 v [E0 10 38 F0] W100 [E0 10 38 F2]
S19.2E 99999 H 10600 v [E0 10 38 F0] W100 [E0 10 38 F3]
S21.5E 11700 V 9750 v [E0 10 38 F1] W100 [E0 10 38 F0]
S21.5E 99999 V 10600 v [E0 10 38 F1] W100 [E0 10 38 F1]
S21.5E 11700 H 9750 v [E0 10 38 F1] W100 [E0 10 38 F2]
S21.5E 99999 H 10600 v [E0 10 38 F1] W100 [E0 10 38 F3]
Maybe the relay is only a mini-DiSEqC-relay (aka tonburst)
then you need:
S19.2E 11700 V 9750 v A W100 [E0 10 38 F0]
S19.2E 99999 V 10600 v A W100 [E0 10 38 F1]
S19.2E 11700 H 9750 v A W100 [E0 10 38 F2]
S19.2E 99999 H 10600 v A W100 [E0 10 38 F3]
S21.5E 11700 V 9750 v B W100 [E0 10 38 F0]
S21.5E 99999 V 10600 v B W100 [E0 10 38 F1]
S21.5E 11700 H 9750 v B W100 [E0 10 38 F2]
S21.5E 99999 H 10600 v B W100 [E0 10 38 F3]
------^
I know you compiled that hardwired in, but I like it explicit.
Tjuess
Heino
--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.
Home |
Main Index |
Thread Index