[linux-dvb] Re: WinTV Nova-T 90002 (Conexant chip)

["Linux TV homemaillist" <linuxtv@nzbaxters.com>]

I've made some (small) progress on this.
Did a kudzu -p and got :
kudzu -p
class: CAPTURE
bus: PCI
detached: 0
driver: cx8800
desc: "Conexant|Winfast TV2000 XP"
vendorId: 14f1
deviceId: 8800
subVendorId: 0070
subDeviceId: 9002
pciType: 1
pcidom:    0
pcibus:  0
pcidev:  e
pcifn:  0

Then did a modprobe cx8800 and now get this :
Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.4 loaded
PCI: Found IRQ 10 for device 0000:00:0e.0
PCI: Sharing IRQ 10 with 0000:00:0e.2
PCI: Sharing IRQ 10 with 0000:00:0e.4
cx8800[0]: quirk: PCIPCI_NATOMA -- set TBFX
cx8800[0]: found at 0000:00:0e.0, rev: 5, irq: 10, latency: 165, mmio:
0xf1000000
cx8800[0]: Your board isn't known (yet) to the driver.  You can
cx8800[0]: try to pick one of the existing card configs via
cx8800[0]: card=<n> insmod option.  Updating to the latest
cx8800[0]: version might help as well.
cx8800[0]: Here is a list of valid choices for the card=<n> insmod option:
cx8800[0]:    card=0 -> UNKNOWN/GENERIC
cx8800[0]:    card=1 -> Hauppauge WinTV 34xxx models
cx8800[0]:    card=2 -> GDI Black Gold
cx8800[0]:    card=3 -> PixelView
cx8800[0]:    card=4 -> ATI TV Wonder Pro
cx8800[0]:    card=5 -> Leadtek Winfast 2000XP Expert
cx8800[0]:    card=6 -> AverTV Studio 303 (M126)
cx8800[0]:    card=7 -> MSI TV-@nywhere Master
cx8800[0]:    card=8 -> Leadtek Winfast DV2000
cx8800[0]:    card=9 -> Leadtek PVR 2000
cx8800[0]:    card=10 -> IODATA GV-VCP3/PCI
cx8800[0]:    card=11 -> Prolink PlayTV PVR
cx8800[0]:    card=12 -> ASUS PVR-416
cx8800[0]:    card=13 -> MSI TV-@nywhere
cx8800[0]: subsystem: 0070:9002, board: UNKNOWN/GENERIC [card=0,autodetected]
cx8800[0]: i2c register ok
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus cx8800[0]
cx8800[0]: i2c attach [client=(tuner unset)]
cx8800[0]: registered device video0 [v4l2]
cx8800[0]: registered device vbi0
cx8800[0]: cx88: tvaudio thread started
cx8800[0]: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO
cx8800[0]: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO
cx8800[0]: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO


Not sure which one to pick!


Running FC2 2.6.9

> I've only seen a couple of posts on this, but I too am trying to shoe-horn
> one of these new cards into FC2 2.6.9.  I can't see the card at all in
> dmesg or lsmod.
>
> When I first rebooted, the new hardware manager started up and discovered
> the card - but since then I can get no further!
>
> As a relative newbie to Linux, can someone please help?
>
>
> Bloody Hauppauge - can't believe this 'subtle' change stuffing everything
> up!!
>
>
>
>