[linux-dvb] Re: WinTV Nova-T 90002 (Conexant chip)

["Linux TV homemaillist" <linuxtv@nzbaxters.com>]

Looks like I need kernel 2.6.10


Anyone know where I can get it for FC2?  I'm googling and looking, but
having no luck.  Yum and apt-get don't have it either....

I have been attempting my first own compile of it, but it's taking ages on
my slow box.

> I've made some (small) progress on this.
> Did a kudzu -p and got :
> kudzu -p
> class: CAPTURE
> bus: PCI
> detached: 0
> driver: cx8800
> desc: "Conexant|Winfast TV2000 XP"
> vendorId: 14f1
> deviceId: 8800
> subVendorId: 0070
> subDeviceId: 9002
> pciType: 1
> pcidom:    0
> pcibus:  0
> pcidev:  e
> pcifn:  0
>
> Then did a modprobe cx8800 and now get this :
> Linux video capture interface: v1.00
> cx2388x v4l2 driver version 0.0.4 loaded
> PCI: Found IRQ 10 for device 0000:00:0e.0
> PCI: Sharing IRQ 10 with 0000:00:0e.2
> PCI: Sharing IRQ 10 with 0000:00:0e.4
> cx8800[0]: quirk: PCIPCI_NATOMA -- set TBFX
> cx8800[0]: found at 0000:00:0e.0, rev: 5, irq: 10, latency: 165, mmio:
> 0xf1000000
> cx8800[0]: Your board isn't known (yet) to the driver.  You can
> cx8800[0]: try to pick one of the existing card configs via
> cx8800[0]: card=<n> insmod option.  Updating to the latest
> cx8800[0]: version might help as well.
> cx8800[0]: Here is a list of valid choices for the card=<n> insmod option:
> cx8800[0]:    card=0 -> UNKNOWN/GENERIC
> cx8800[0]:    card=1 -> Hauppauge WinTV 34xxx models
> cx8800[0]:    card=2 -> GDI Black Gold
> cx8800[0]:    card=3 -> PixelView
> cx8800[0]:    card=4 -> ATI TV Wonder Pro
> cx8800[0]:    card=5 -> Leadtek Winfast 2000XP Expert
> cx8800[0]:    card=6 -> AverTV Studio 303 (M126)
> cx8800[0]:    card=7 -> MSI TV-@nywhere Master
> cx8800[0]:    card=8 -> Leadtek Winfast DV2000
> cx8800[0]:    card=9 -> Leadtek PVR 2000
> cx8800[0]:    card=10 -> IODATA GV-VCP3/PCI
> cx8800[0]:    card=11 -> Prolink PlayTV PVR
> cx8800[0]:    card=12 -> ASUS PVR-416
> cx8800[0]:    card=13 -> MSI TV-@nywhere
> cx8800[0]: subsystem: 0070:9002, board: UNKNOWN/GENERIC
> [card=0,autodetected]
> cx8800[0]: i2c register ok
> tuner: Ignoring new-style parameters in presence of obsolete ones
> tuner: chip found at addr 0xc2 i2c-bus cx8800[0]
> cx8800[0]: i2c attach [client=(tuner unset)]
> cx8800[0]: registered device video0 [v4l2]
> cx8800[0]: registered device vbi0
> cx8800[0]: cx88: tvaudio thread started
> cx8800[0]: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO
> cx8800[0]: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO
> cx8800[0]: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO
>
>
> Not sure which one to pick!
>
>
> Running FC2 2.6.9
>
>> I've only seen a couple of posts on this, but I too am trying to
>> shoe-horn
>> one of these new cards into FC2 2.6.9.  I can't see the card at all in
>> dmesg or lsmod.
>>
>> When I first rebooted, the new hardware manager started up and
>> discovered
>> the card - but since then I can get no further!
>>
>> As a relative newbie to Linux, can someone please help?
>>
>>
>> Bloody Hauppauge - can't believe this 'subtle' change stuffing
>> everything
>> up!!
>>
>>
>>
>>
>
>
>