[linux-dvb] Re: cinergyT2 remote, repeat handling, keycodes WAS:(Re: Re: cinergyT2: which kernel/usb module to use?)

[Stefan Lucke <stefan@lucke.in-berlin.de>]

On Dienstag, 14. Dezember 2004 16:07, Johannes Stezenbach wrote:
> Stefan Lucke wrote:
> > Quoting Holger Waechtler:
> > > The linux input infrastructure handles this properly for you by 
> > > setting/modifying/canceling a repeat timer -- please have a look in the 
> > > input and event implementation in the kernel (you would now have to send 
> > > repeat events instead of repeating key up/downs...)
> > 
> > At the moment I won't dig that deep into driver programming.
> 
> linux/Documentation/input/input-programming.txt has just 281 lines.

Thanks for the hint. I'll have to think about that again after reading.

> 
> > Thats not the major problem. The real problem is, not all keycodes
> > arrive at application side :-( even they were reported via syslog.
> > Numbers, up, down, left and right are ok.
> 
> Did you test with evtest?

No special test. When working with X11 and pressing keys of the remote
while normal konsole window has input focus, numbers pressed are shown.
So I expected that all keys pressed could be read by vdr via keyboard in.
Maybe my assumption is wrong.

> 
> > By the way, is it possible to wakeup the computer via an usb event ?
> > That didn't work for me although wakeup via usb is set in bios.
> 
> As the cinergyT2 is bus powered, are you sure it stays alive
> when the PC is sleeping? I think the USB drivers power down
> the devices and the bus.

The blue LED is on while my epia boad is shut down ;-).

stefan lucke