[vdr] Re: 1.1.13 - simple diseqc question

[Dariush Forouher <dariush@forouher.de>]

Am Sam, 2002-10-26 um 19.14 schrieb Rene Bartsch:
> As your switch can handle diseqc, you should remove the tone/voltage
> commands for faster switching.
> 
> S19.2E  11700 V  9750  W5 [E0 10 38 F0]
> S19.2E  99999 V 10600 W5 [E0 10 38 F1]
> S19.2E  11700 H  9750  W5 [E0 10 38 F2]
> S19.2E  99999 H 10600 W5 [E0 10 38 F3]
> 
> S13E    11700 V  9750  W5 [E0 10 38 F4]
> S13E    99999 V 10600 W5 [E0 10 38 F5]
> S13E    11700 H  9750  W5 [E0 10 38 F6]
> S13E    99999 H 10600 W5 [E0 10 38 F7]
> 
> You have to try the wait-time Wnnn. Values below 5 were to fast for
> syncronizing at my setup and every higher value slows down switching.
> Eventually you have to exchange the F-values between the satelites. In this
> configuration Astra is the first LNB (F0 - F3) and Hotbird the second
> (F4-F7).
That doesn't work with my switch. This is the easiest working config
I've fount:
S19.2E  11700 V  9750 t v # 1st LNB
S19.2E  99999 V 10600 T v
S19.2E  11700 H  9750 t V
S19.2E  99999 H 10600 T V
S13E    11700 V  9750 t v [E0 10 38 F4] t #2nd LNB
S13E    99999 V 10600 t v [E0 10 38 F4] T
S13E    11700 H  9750 t V [E0 10 38 F4] t
S13E    99999 H 10600 t V [E0 10 38 F4] T

In the "manual" of the switch is written, that it only supports diseqc
1.0. Could this be the reason?

ciao
Dariush
-- 
PGP Fingerprint: 0x886C99A1



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.