[vdr] Re: Setting priority for different cards

[Wolfgang Goeller <wgoeller@heraklit.ch>]

Klaus Schmidinger wrote:

[ TS continuity errors ]

> Does the error move with the card (that would indicate
> a card failure) or does it stick with the PCI slot (that might indicate an
> interrupt problem or something like that).
Sorry for not beeing precise enough: The error sticks to the PCI slot.
It's an MSI-board.
card 1 is a full-featured card, it shares IRQ 17 with card 3 (Nova-S)
card 2 and 4 are Nova-S and share IRQ 18.


  0:  250040172    IO-APIC-edge  timer
  1:      42181    IO-APIC-edge  keyboard
  2:          0          XT-PIC  cascade
  4:    1953569    IO-APIC-edge  lirc_serial
 12:     572674    IO-APIC-edge  PS/2 Mouse
 14:    1502888    IO-APIC-edge  ide0
 16: 1134793781   IO-APIC-level  eth0
 17:  753899559   IO-APIC-level  saa7146(0), saa7146(2)
 18:  298928347   IO-APIC-level  saa7146(1), saa7146(3)
 19:   26865983   IO-APIC-level  ide2, ide3

Kernel is vanilla 2.4.20

regards
Wolfgang






--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.