[vdr] Re: Multiple languaghes

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

nilsn wrote:
> Rolf Groppe
>
> > Klaus Schmidinger wrote
> >
> > > I just tried, but there's no beep on the right channel (at least not
> > > now). However, on this channel, when I switch the audio channel
> > > (left/stereo/right) I do experience a slight difference (mostly a
> > > difference in the background noise), while on others there is no
> > > difference at all.
> > I just checked that station again. Actually there is no beep but a second
> > speaker and i can switch between both.
> >
> >
> > > I found another channel on this transponder:
> > > CH1
> > > RUS-ORTi;GlobeCast:12597:vC34:S13.0E:27500:167:108,109:0:0:8208:318:9
> > > 400:0
> > > This one has two audio PIDs, and on the second one there are two
> > > different speakers on each channel. However, on this channel I don't
> > > experience any change when switching the audio channel. Can you please
> > > verify whether you can?
> > It is the same as for you. No change when switching the audio
> > channel. Both
> > speakers on both channels
>
> I have made a recording of such a recording(klaus: your mailserver rejected
> my mail)
> get it here: http://nilux.com/test.tar.bz2 or from cadsoft
>
> regards
> nilsn
Thanks, with this recording it works just fine - even via the SPDIF output
of the DVB card :-)

So apparently there needs to be some special marker in the data stream
for the AV7110 to behave correctly...

Klaus