Frequency scan

From LinuxTVWiki
Revision as of 16:29, 22 November 2014 by Wirbel (talk | contribs) (Scan apps that don't require an initial channel file)
Jump to: navigation, search

In order to be able receive a particular signal with your TV tuner device you will need to tune/set it to the correct radio frequency used by that source transmission. Therefore, you (or, at least, the viewing application you are using) will first want to know which frequencies are used for transmission and, thereby, may be tunable by your receiver at your residing location. Frequency scanning utilities, listed below, perform such signal detection and, generally, provide a list of the frequencies upon which content is discovered, with which higher level applications can then in turn use for tuning purposes.

Note: Historically, the set of frequencies used under the older analogue systems have differed from one another, meaning that the particular frequencies used across North America, Europe, Asia, etc., etc., will differ depending upon the transmission standard adopted within each nation. When countries began to make the transition to digital TV systems, most have opted to continue to use their old channel frequency schemes so as to make the switch from analog to digital systems as seamless as possible for the end user.

Frequency Scanning Utilities



On Digital TV, the scanning process consists on tuning into some physical channel/transponder frequencies and parsing the MPEG Transport Stream, in order to identify the services and the corresponding audio, video, teletext and data streams. The service is also known Virtual Channel.

There are two types of scanning applications: the ones that rely on frequency channel files and the ones that tries hard to identify the existing channels, based on the knowledge of the Country.

Scan apps based on a channel file

Those applications are faster to identify the channels, but they are unable to find any channel outside the channel table.

For them to work, an initial file is needed. Those files are provided at dtv-scan-tables repository, using dvbv5 file format.

Most common applications used for channel scan:

Scan apps that don't require an initial channel file

Scan applications that don't need a channel file have internally a table that allows them to construct internally a table with possible frequencies and tuning parameters to seek. As the number of possible channels/tuning parameters are a way higher than the ones defined on a channel table, the scanning process will take several minutes (up to an hour, if the card doesn't support autodetection for some DVB properties).

Applications using this approach:

Comparison of DVB frequency scanning commandline utilities

Note: The differences between scan and dvbscan should be added to this wiki article. The information for dvbscan is still to be completed - please help.

The following table lists the main features of several of the popularly used command line scanners. For specific information on a particular utility's usage, have a look at its specific wiki article.

feature \ scanner scan dvbscan w_scan scan-s2 dvbv5-scan
download (upstream version)
last stable linuxtv-dvb-apps-1.1.1 linuxtv-dvb-apps-1.1.1 none / use latest version ? v4l-utils-1.4.0
comments unmaintained
DVB-S2 and DVB-T2 support missing unmaintained
DVB-S2 and DVB-T2 support missing maintained
DVB API needs DVB API version 3.2 or higher DVB API version 3.2 or higher DVB API version 3.2 or higher
compiling needs DVB API version 5.0 or higher
DVB API version 5.0 or higher
last update 02/2009
DVB API version 3.2 or higher
supported DTV types DVB-S, DVB-C (Annex A only - mainly Europe), DVB-T, ATSC (VSB and QAM) DVB-S, DVB-C (Annex A only - mainly Europe), DVB-T, ATSC (VSB and QAM) DVB-S, DVB-S2, DVB-C (Annex A only - mainly Europe), DVB-T, DVB/T2, ATSC (VSB and QAM), DMB-TH (China) DVB-S, DVB-S2, DVB-C (Annex A only - mainly Europe), DVB-T, ATSC (VSB and QAM) DVB-S, DVB-S2, DVB-C (Annex A and C - worldwide), DVB-T, DVB-T2, ATSC (VSB and QAM), ISDB-T and more
initial scan file required
(matching to your satellite or local aerial/cable network)
yes yes not required yes
NOTE: slightly different file format from scan because of additional DVB-S2 support.
yes (uses libdvbv5 file format by default, but dvb-apps and s2-scan file formats are accepted too)
can generate initial scan file no no yes no no
can generate channels.conf for zap/xine/mplayer/vlc yes (default) yes (default) yes yes yes
can generate channels.conf for VDR yes, but hopeless outdated (vdr-1.3 only) yes, but hopeless outdated (vdr-1.3 only) yes (default) yes (default) yes (after version 1.4.0)
can generate channels.dvb for kaffeine no no yes no no

External Links


Digital For some other general sources (which may or may not be that useful) for finding local channel frequency lists, see: