Hauppauge WinTV-HVR-4000: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
Line 144: Line 144:


====HG Drivers====
====HG Drivers====
These are the latest drivers are are built into the latest hg repo of the linux-tv archive
These are the latest drivers. They are now available in the latest hg repo of the linux-tv archive.
They support DVB-T, DVB-S/S2, analogue TV and FM radio. Multiple frontends are supported: DVB-S/S2 and DVB-T
appear as frontend0 and frontend1 respectively.


hg clone http://linuxtv.org/hg/v4l-dvb/
hg clone http://linuxtv.org/hg/v4l-dvb/
Line 151: Line 153:
make install
make install
reboot
reboot




====Multifrontend (MFE) driver (This is now integrated into v4l-dvb) ====
====Multifrontend (MFE) driver (This is now integrated into v4l-dvb) ====

Revision as of 15:46, 3 November 2008

The HVR-4000 and Remote

A hybrid DVB-S2 PCI card from Hauppauge.

It is currently not supported under Linux. However, experimental support for some of the device's features is available (see below for details).

Overview/Features

Quad-mode TV tuner featuring DVB-S2 HDTV, DVB-S, DVB-T, analogue PAL/SECAM cable TV, FM radio reception, plus S-Video, Composite and stereo audio inputs for A/V capture, all in one card!

DiSEqC 1.0 and 1.2 supported with Linux drivers.

Note: DVB-T and DVB-S/S2 cannot be used simultaneously due to a hardware limitation, but you can easily switch from one to the other.

Included: IR remote control, batteries, and remote control receiver. FM radio antenna. S-Video/Composite adapter (to allow a Composite RCA yellow phono to be connected to the S-Video input socket).

Sockets: FM, TV, SAT, S-VIDEO IN, LINE IN, IR.

No CI.

Components Used

  • Conexant CX24116 (DVB-S2 demodulator and FEC decoder)
  • Conexant CX24118A (digital satellite tuner RF IC)
  • Conexant CX23882 (A/V decoder & PCI bridge)
  • Conexant CX22702 (DVB-T demodulator)
  • Philips FMD1216ME MK3 Hybrid Tuner
    • Infineon TUA6034 'TAIFUN' (Analogue/Digital TV tuner)
    • Philips TDA9887 (Analogue TV/FM demodulator)
    • Philips TDA7040 (FM stereo decoder)
  • Wolfson WM8775 (4 stereo input ADC)
  • IDT QS3257 (Mux)
  • Intersil ISL6421 (LNB voltage controller)

Identification

04:08.0 0400: 14f1:8800 (rev 05)
        Subsystem: 0070:6902
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:08.1 0480: 14f1:8811 (rev 05)
        Subsystem: 0070:6902
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:08.2 0480: 14f1:8802 (rev 05)
        Subsystem: 0070:6902
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:08.4 0480: 14f1:8804 (rev 05)
        Subsystem: 0070:6902
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 255
        Region 0: Memory at f7000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Making it Work

Firmware

For a discussion of the different firmware versions, see http://allrussian.info/thread.php?threadid=98587.

CX24116 firmware version: 1.20.79.0, size: 32522 bytes, md5sum: 417cafd3b10e207e1dba9a03ad63e405
CX24116 firmware version: 1.22.82.0, size: 32501 bytes, md5sum: b728b5d635393a4081e87d30d87a7632
CX24116 firmware version: 1.23.86.1, size: 32674 bytes, md5sum: dd8dfdfca6b72462d9db8032f78631c8

Firmware v1.20.79.0

One could use the script provided from wget-fw.sh to fetch the firmware for us. Basically what it does is :

1) Fetch an archive :

wget ftp://167.206.143.11/outgoing/Oxford/88x_2_119_25023_WHQL.zip

2) Decompress what's needed :

unzip -jo 88x_2_119_25023_WHQL.zip Driver88/hcw88bda.sys

3) Extract the firmware (v1.20.79.0) and put it in the right place :

sudo dd if=hcw88bda.sys of=/lib/firmware/dvb-fe-cx24116-1.20.79.0.fw skip=81768 bs=1 count=32522
sudo ln -s /lib/firmware/dvb-fe-cx24116-1.20.79.0.fw /lib/firmware/dvb-fe-cx24116.fw
  Ubuntu: Place file in /lib/firmware
  Debian: Place file in /usr/lib/hotplug/firmware/

Firmware v1.22.82.0

For slightly newer firmware (v1.22.82.0) using drivers from Hauppauge

1) Download the driver archive :

wget http://www.wintvcd.co.uk/drivers/88x_2_122_26109_WHQL.zip

2) Decompress the .sys file :

unzip -jo 88x_2_122_26109_WHQL.zip Driver88/hcw88bda.sys

3) Extract the firmware and put it in the firmware directory :

sudo dd if=hcw88bda.sys of=/lib/firmware/dvb-fe-cx24116-1.22.82.0.fw skip=75504 bs=1 count=32501
sudo ln -s /lib/firmware/dvb-fe-cx24116-1.22.82.0.fw /lib/firmware/dvb-fe-cx24116.fw

Firmware v1.23.86.1

Firmware v1.23.86.1 is available with the TeVii S460 Linux driver at http://tevii.com/support.html. (But what's with the proprietary RAR archive format? Geez...)

wget http://tevii.com/Tevii_linuxdriver_0815.rar
sudo apt-get install unrar-free
unrar x Tevii_linuxdriver_0815.rar
sudo cp tevii_linuxdriver_0815/fw/dvb-fe-cx24116.fw /lib/firmware/dvb-fe-cx24116-1.23.86.1.fw
sudo ln -s /lib/firmware/dvb-fe-cx24116-1.23.86.1.fw /lib/firmware/dvb-fe-cx24116.fw

Drivers

There is currently no in-kernel driver for this card, but it is expected that there will be a driver in kernel 2.6.28.

Note: If someone wants to provide a brief synopsis of the driver tale of woe, outlining why there isn't a greater level of support, then do so here ... or just read here

However, experimental support does exist, provided by the four different drivers listed below. Ubuntu Hardy users should first read the note about the sound driver (cx88_alsa) below.

HG Drivers

These are the latest drivers. They are now available in the latest hg repo of the linux-tv archive. They support DVB-T, DVB-S/S2, analogue TV and FM radio. Multiple frontends are supported: DVB-S/S2 and DVB-T appear as frontend0 and frontend1 respectively.

 hg clone http://linuxtv.org/hg/v4l-dvb/
 cd v4l-dvb
 make
 make install
 reboot

Multifrontend (MFE) driver (This is now integrated into v4l-dvb)

These drivers give you the ability to have multi frontend on the HVR4000. (ie DVB-S and DVB-T tuners, or even the triple-play DVB-S/S2 + DVB-T, see below).

In the multifrontend driver, DVB-T and DVB-S are supported within the current 3.2 API and so it is compatible with current applications.

DVB-S/S2 then appears at /dev/dvb/adapter0/frontend0 and DVB-T appears at /dev/dvb/adapter0/frontend1.

Tuning DVB-S and DVB-S2 channels can be done with szap-s2

Kaffeine handles multiple frontends well without modification -- they appear in the DVB settings as "DVB Device 0:0" (=/dev/dvb/adapter0/frontend0, i.e. DVB-S) and "DVB Device 0:1" (=/dev/dvb/adapter0/frontend1, i.e. DVB-T). Both devices can be configured and tuned in the application, and Kaffeine will switch to the correct one each time you change the channel. DiSEqC 1.2 is supported too. Kaffeine will display HDTV delivered over DVB-S, e.g. BBC HD, see Kaffeine.

Most programs such as MythTV don't know about multiple frontends yet. You can only use one at a time, but the following allows you to swap between them without having to load the modules in differently:

mkdir /dev/dvb/adapter1
ln -s /dev/dvb/adapter0/frontend1 /dev/dvb/adapter1/frontend0
ln -s /dev/dvb/adapter0/net1 /dev/dvb/adapter1/net0
ln -s /dev/dvb/adapter0/dvr1 /dev/dvb/adapter1/dvr0
ln -s /dev/dvb/adapter0/demux1 /dev/dvb/adapter1/demux0

Multiproto driver (OLD - To Be removed from Wiki)

The wiki in german languagedescribes what has to be done in order to compile "standard" multiproto driver.
Unfortunately at the date of writing, there is no support for our beloved card, so one should fetch
the patch from linuxtv mailing list which you should apply to the tree before compiling the driver. I haven't tested the patch which adds the multi frontend support but it's certainly a way to follow :-)

After having applied the patch, one could follow the first link of this section to have a VDR with full DVB-S2 support!!!

Latest - 29-1-08
---------------------------
hg clone http://jusst.de/hg/multiproto
wget http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080128/adee4c88/attachment-0001.bin
mv attachment-0001.bin multiproto-hvr4k-2008-01-28.patch.bz2
bunzip2 multiproto-hvr4k-2008-01-28.patch.bz2
ln -s multiproto a; ln -s multiproto b
patch -p0 < multiproto-hvr4k-2008-01-28.patch
cd multiproto
run make menuconfig and disable the USB capture cards as the em88 drivers are broken and make sure customise frontends is enabled.
make && make install && reboot

UPDATE 1st Aug 2008: Igor Liplianin has created another repository containing multiproto code and szap2 at http://liplianindvb.sourceforge.net/hg/, reported to be working with the HVR-4000. See http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027514.html. This appears to be similar to the V4L/DVB staging development repository at http://linuxtv.org/hg/v4l-dvb/ but with the addition of multiproto code.

hg clone http://liplianindvb.sourceforge.net/hg/liplianindvb
hg clone http://liplianindvb.sourceforge.net/hg/szap2


UPDATE 12. Oct. 2008: The multiproto driver seems to be integrated in V4L.

hg clone http://linuxtv.org/hg/v4l-dvb/
hg clone http://mercurial.intuxication.org/hg/szap-s2

Sample kernel output

Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2
cx88[0]: TV tuner type 63, Radio tuner type -1
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx2388x alsa driver version 0.0.6 loaded
cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
tuner' 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner' 2-0061: chip found @ 0xc2 (cx88[0])
tuner' 2-0063: chip found @ 0xc6 (cx88[0])
tveeprom 2-0050: Hauppauge model 69009, rev B2D3, serial# 2807241
tveeprom 2-0050: MAC address is 00-0D-FE-2A-D5-C9
tveeprom 2-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 2-0050: audio processor is CX882 (idx 33)
tveeprom 2-0050: decoder processor is CX882 (idx 25)
tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=69009
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner)
input: cx88 IR (Hauppauge WinTV-HVR400 as /class/input/input3
cx88[0]/0: found at 0000:04:08.0, rev: 5, irq: 21, latency: 32, mmio: 0xfa000000
wm8775' 2-001b: chip found @ 0x36 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi1
cx88[0]/0: registered device radio2
cx88[0]/2: cx2388x 8802 Driver Manager
cx88[0]/2: found at 0000:04:08.2, rev: 5, irq: 21, latency: 32, mmio: 0xf8000000
cx8802_probe() allocating 2 frontend(s)
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
cx88[0]/2: cx2388x based DVB/ATSC card
tuner-simple 2-0061: attaching existing instance
tuner-simple 2-0061: type set to 63 (Philips FMD1216MEX MK3 Hybrid Tuner)
DVB: registering new adapter (cx88[0])
DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
DVB: registering adapter 0 frontend 1 (Conexant CX22702 DVB-T)...
cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
cx24116_firmware_ondemand: Waiting for firmware upload(2)...
cx24116_load_firmware: FW version 1.20.79.0
cx24116_firmware_ondemand: Firmware upload complete

Sound driver

Alsa driver: cx88_alsa.

To make sure the sound card in the HVR-4000 does not grab card index 0 (instead of your motherboard or discrete sound card) add the following to /etc/modprobe.d/alsa-base (or wherever your distro sets alsa kernel module options):

# Prevent abnormal drivers from grabbing index 0
options cx88_alsa index=-2

Note: the Ubuntu Hardy kernel (2.6.24) has a separate Ubuntu version of the cx88_alsa module which causes problems if you compile your own drivers (modprobe cx88_alsa gives 'cx88_alsa: disagrees about version of symbol' errors). Upgrade the kernel to one which uses a stock cx88_alsa module and then compile and install the HVR4000 driver. See http://www.howtoforge.com/kernel_compilation_ubuntu.

Usage with Mythtv

Most programs such as MythTV don't know about multiple frontends yet. You can only use one at a time, but the following allows you to use both frontends.

mkdir /dev/dvb/adapter1
ln -s /dev/dvb/adapter0/frontend1 /dev/dvb/adapter1/frontend0
ln -s /dev/dvb/adapter0/net1 /dev/dvb/adapter1/net0
ln -s /dev/dvb/adapter0/dvr1 /dev/dvb/adapter1/dvr0
ln -s /dev/dvb/adapter0/demux1 /dev/dvb/adapter1/demux0

Audio/Video capture

Scan for channels (UK):

mplayer -v tv:// -tv driver=v4l2:device=/dev/video0:chanlist=europe-west:normid=4:alsa:adevice=hw.1:immediatemode=0 -tvscan autostart:period=2.0:threshold=20 

Play channel (BBC1 WOOLWICH UK):

mplayer -v tv:// -tv driver=v4l2:device=/dev/video0:chanlist=europe-west:normid=4:alsa:adevice=hw.1:immediatemode=0:freq=759.25

Capture channel (BBC1 WOOLWICH UK):

mencoder -fps 50 -ofps 50 -vf harddup,softskip,yadif=1 tv:// -tv channel=57:driver=v4l2:device=/dev/video0:normid=4:input=0:alsa:adevice=hw.1,0:audiorate=32000:width=768:height=576 -ovc lavc -lavcopts vcodec=mpeg4:autoaspect:vbitrate=512 -oac mp3lame -lameopts cbr:preset=96 -endpos 60 -o test.avi

Analogue TV and Teletext Receiver

Does anyone have any info about Linux support?

Note: I have latest http://linuxtv.org/hg/v4l-dvb with mythtv working with analogue TV. You add it as a normal V4L capture card in mythtv. You need this patch to make inital tuning (When you press "Watch TV") in mythtv work: http://svn.mythtv.org/trac/ticket/5744, without it you need to change channel before you see picture instead of snow. Scanning for channels also works. Set audiorate to 48000 to get good sound (in capturecard setup and also in playback groups). Anders 11:40, 26 September 2008 (CEST)

Another way is to use tvtime (http://tvtime.sourceforge.net/) which is available in many distros.

FM Radio Receiver

The Latest Drivers have radio support. See here for radio listening applications http://linuxtv.org/v4lwiki/index.php/Radio_Listening_Applications.

Example test. First start playing the ALSA sound:

arecord -D hw:1,0 -f dat | aplay  &

and then tune with fm-tools:

fm -T forever 99.3

or with radio (which can have preset radio stations):

radio -c /dev/radio0

Change to mono mode

v4l2-ctl -d /dev/radio0 -t mono

Go back to stereo mode

v4l2-ctl -d /dev/radio0 -t stereo

Remote Control Support

When you have installed the drivers check dmesg/logs and you'll find a line like:

input: CX88 IR (Hauppauge WinTV-HVR4000 as /class/input/inputX

You can run lirc for example like: lircd --driver=dev/input --device=/dev/input/eventX (replace X with what it finds in the dmesg)

  Debian: edit /etc/lirc/hardware.conf
  DRIVER="dev/input"
  DEVICE="/dev/input/eventX"

/etc/lirc/lircd.conf (Works)

begin remote

  name  Hauppauge-HVR4000-Remote
  bits           16
  eps            30
  aeps          100

  one             0     0
  zero            0     0
  pre_data_bits   16
  pre_data       0x8001
  gap          133325
  toggle_bit_mask 0x8001001C

      begin codes
          Power                    0x0074
          Go                       0x0161
          TV                       0x0179
          Video                    0x0189
          Music                    0x0188
          Pictures                 0x016F
          Guide                    0x016D
          Radio                    0x0181
          Up                       0x0067
          Down                     0x006C
          Left                     0x0069
          Right                    0x006A
          OK                       0x001C
          Back/Exit                0x00AE
          Menu                     0x008B
          PrevCh                   0x019C
          Mute                     0x0071
          Vol+                     0x0073
          Vol-                     0x0072
          Ch+                      0x0192
          Ch-                      0x0193
          Rec                      0x00A7
          Stop                     0x0080
          Play                     0x00CF
          Pause                    0x0077
          Rewind                   0x00A8
          Forward                  0x00D0
          Replay                   0x00A5
          Skip                     0x00A3
          1                        0x0002
          2                        0x0003
          3                        0x0004
          4                        0x0005
          5                        0x0006
          6                        0x0007
          7                        0x0008
          8                        0x0009
          9                        0x000A
          0                        0x000B
          Text                     0x0184
          Sub/CC                   0x0172
          Red                      0x018E
          Green                    0x018F
          Yellow                   0x0190
          Blue                     0x0191
      end codes

end remote

External Links